Return to KLUBNL.PL main page

rsgb_lf_group
[Top] [All Lists]

Re: LF: OK2BVG_TX_8970

To: [email protected]
Subject: Re: LF: OK2BVG_TX_8970
From: Stefan Schäfer <[email protected]>
Date: Fri, 11 Mar 2011 20:27:01 +0100
In-reply-to: <[email protected]>
References: <[email protected]>,<[email protected]> <[email protected]>,<[email protected]> <[email protected]>,<[email protected]> <[email protected]>
Reply-to: [email protected]
Sender: [email protected]
User-agent: Mozilla/5.0 (Windows; U; Windows NT 6.1; de; rv:1.9.1.8) Gecko/20100227 Thunderbird/3.0.3
Hello Lubos,

Yes, it was. I am curious that Paul has received your signal, unbelivable! I have had local QRM to that time i saw, maybe this is the reason. Just try again. If you make a break for ID purposes, the break should be about 1 hour, 5 minutes is useless, at least for those who are watching in 424 uHz.

Currently i am doing a local test again here in 20m distance of my grabber. It is just to see if the soundcard works well, since i had some problems in my last experiment (phase glitches, you know). But you see that DFCW-6000 works in SpecLab. The soundcard is locked to DHO38 now, for test purposes. Your screenshots of my last transmission have been excellent, in all modes and on all bands. So you know how to use the program :-)
Do you think it is possible to convince you to try a transmission in DFCW by using SL? :-) This would be an even better ID ( a well defined frequency shift). You may send "K" or so, or "B". Just remember OE3GHB who send a nice "G" last weekend. There is no doubt for everyone that this is a G in DFCW i think :-) Or one day before, "NM" by DF6NM. If you want to try that and need some advice, just ask :-)

73, Stefan/DK7FC


Am 11.03.2011 19:53, schrieb Lubos OK2BVG:
Hello Stefan!
Yes it is true. My PWR is 25W, antenna current is 300mA. But I use fixed antenna, as you know, so the ERP is cca 30uW only (I can expect this value thanks to Gerhard´s calculation).
Today´s test was very interesting.

Lubos



Date: Fri, 11 Mar 2011 19:16:32 +0100
From: [email protected]
To: [email protected]
Subject: Re: LF: OK2BVG_TX_8970

Hello Lubos,

Sorry, i haven't seen anything it seems. But 600 km by using 25 W at 8970 Hz would almost be a wonder :-)

Go on and good luck

73, Stefan


Am 11.03.2011 13:47, schrieb Lubos OK2BVG:
Hello Eddie!
Thanks, for your receiving! My TX was on from 08:00 to 12:30UT. Did you detect my signal?

Lubos, OK2BVG


Date: Fri, 11 Mar 2011 06:52:19 +0000
From: [email protected]
To: [email protected]
Subject: Re: LF: OK2BVG_TX_8970

Hi Lubos

RX is on this morning awaiting your test.

Good Luck

Eddie G3ZJO

On 10/03/2011 19:08, Lubos OK2BVG wrote:
Hello Stefan, Markus, Gerhard and all VLF enthusiasts!
I was quite busy during last days, so I am writing just now.
Well... I tested my new VLF TX set of the day  5th March. It was the first test only and I am very pleased, you saw my signal. I expected, it would be poorly visible  on the Gerhard´s grabber only! In fact, it was visible with S/N 10dB.
Some information:
The antenna is my MW Marconi L (24m up), but I increased top load on the value 220m.
Generator is Wandel/Goltermann PS30, the finest tuning step 1Hz (OCXO).
PA is Seba Dynatronic 25W out.
My loading coil is made from 60l barrel, it contains two fixed coils  500 + 500 turns of wire 0,4CuL + rotary coil made from 5litre bucket.

I am going to take some photos and give them on my websides at the weekend. I will let you know, they are there.

My next VLF test will be tomorrow (2011-03-11):    
I will start transmission on 8970 tomorrow morning at 08:00UT. 
Than I won´t be at home, so TX will transmit to approximately 12:00UT. It is the best time for VLF TX test, becouse the noise would be the lowest.

Thanks for your encouraging words and help! 

73!

Lubos


Date: Wed, 9 Mar 2011 18:23:59 +0100
From: [email protected]
To: [email protected]
Subject: Re: VLF: OK2BVG signal in Todmorden

Wow, the next one!
Lubos, can you tell us about your station? All parameters and data please :-)
How strong have you been visible at OE3GHB?

Welcome in the VLF TX group ;-)

73, Stefan/DK7FC


Am 09.03.2011 10:49, schrieb Markus Vester:
Dear Lubos, LF,
 
beneath is a posting from Paul Nicholson in the Yahoo VLF groop. His spectrum from last Saturday morning shows three amateur signals, including yours.
 
Very good!
 
73, Markus
 
________________________________
Re: [VLF_Group] Re: DF6NM on 8970.00
Tue Mar 8, 2011 11:54 pm


Thanks for the info Markus.

> I do not know whether that was really a transmission
> from Lubos, or a local pretest from Gerhard.

Yes, that long dash was Lubos.
OK2BVG was active that morning for a couple of hours.

I get this spectrum, (08:00-09:00, 278uHz bins)

http://abelian.org/vlf/tmp/110308b.gif

which has a small peak at 8970Hz - 3.0mHz, bearing east.

To bring this out I found the best S/N at bearing 110 and
I synthesised a unidirectional cardioid by combining H and E fields.

Only 3.6 sigma unfortunately.

Hopefully Lubos will do further tests. He should be visible
here with 30uW at 1423km if the tx frequency is stable enough.
--
Paul Nicholson
--

Re: [VLF_Group] Re: DF6NM on 8970.00


Thanks for the info Markus.

> I do not know whether that was really a transmission
> from Lubos, or a local pretest from Gerhard.

Yes, that long dash was Lubos.
OK2BVG was active that morning for a couple of hours.

I get this spectrum, (08:00-09:00, 278uHz bins)

http://abelian.org/vlf/tmp/110308b.gif

which has a small peak at 8970Hz - 3.0mHz, bearing east.

To bring this out I found the best S/N at bearing 110 and
I synthesised a unidirectional cardioid by combining H and E fields.

Only 3.6 sigma unfortunately.

Hopefully Lubos will do further tests. He should be visible
here with 30uW at 1423km if the tx frequency is stable enough.
--
Paul Nicholson
--






Attachment: G!.jpg
Description: JPEG image

Attachment: NM!.jpg
Description: JPEG image

<Prev in Thread] Current Thread [Next in Thread>