Return to KLUBNL.PL main page

rsgb_lf_group
[Top] [All Lists]

Re: LF: VLF Transmissions - G3XIZ - 12th / 13th February

To: <[email protected]>
Subject: Re: LF: VLF Transmissions - G3XIZ - 12th / 13th February
From: "mal hamilton" <[email protected]>
Date: Thu, 10 Feb 2011 18:00:54 -0000
References: <[email protected]> <[email protected]>
Reply-to: [email protected]
Sender: [email protected]
Chris
Some sort of ID is necessary. I arranged with OE5ODL to cut carrier for pos id. A continuous carrier needs regular cuts.
QRS is preferable to DFCW as an ID tool.
also
regular feedback reporting  is also necessary.
g3kev
 
----- Original Message -----
Sent: Thursday, February 10, 2011 5:52 PM
Subject: Re: LF: VLF Transmissions - G3XIZ - 12th / 13th February

Hi Chris,

Very good luck. I'll be looking for you and hoping for success this time.

An email direct and to this group saying when TX starts/ends would be helpful. Don't suppose you can send QRSS60 or similar to help with ID? Have passed the word on to Nick G4IKZ as he is closer to you than me and not sure he subscribes to this list.

73s
Roger G3XBM


On 10 February 2011 14:42, Chris Osborn <[email protected]> wrote:
LF,
 
I have had permission to transmit on VLF this coming weekend: 12th and 13th February.
Weather permitting I shall try again with my balloon-launched aerial, hopefully about 50m vertical.
 
The frequency will be
 
8.976 66 kHz  (i.e. 10.000 MHz / 1114) and is derived from an oven controlled xtal oscillator.
Hopefully the frequency will be more stable than last time.
If this frequency proves unsuitable I can transmit on 10.000 MHZ / 1112 . .10.000 MHz / 1116  etc.
 
I shall send a continuous carrier as and when conditions permit.
 
My newly built VLF TX is working well and can deliver about 150 watts of RF.
On this occasion I shall be using the original (fairly lossy) loading coil but am presently making a more efficient one.
 
All reports will be most welcome.
 
73
Chris G3XIZ
 
 




--
g3xbm-qrp.blogspot.com/
www.g3xbm.co.uk
www.youtube.com/user/g3xbm
G3XBM   GQRP 1678    ISWL G11088
<Prev in Thread] Current Thread [Next in Thread>