LF: Soldering enamelled copper wire

Return to KLUBNL.PL main page

rsgb_lf_group

[Top] [All Lists]

LF: Soldering enamelled copper wire

from [John Rabson]

[Permanent Link][Original]

To:	[email protected]
Subject:	LF: Soldering enamelled copper wire
From:	John Rabson <[email protected]>
Date:	Wed, 23 Feb 2011 11:23:26 +0100
Reply-to:	[email protected]
Sender:	[email protected]

LF,

I have a reel of such wire labelled as follows:

"Wire copper enamelled
Part 1230983 0.71 mm 1/2 kg
Solder only in well ventilated area. Fumes are toxic"

The manufacturer is stated to be Rowan Cable Products Ltd.  I found their 
website but don't seem able to get into it to find out whether the covering of 
the wire is solderable and (if so)  whether any special techniques are required.

Can anyone advise, please?

73
John F5VLF

[More with this subject...]

<Prev in Thread]	Current Thread	[Next in Thread>
LF: Soldering enamelled copper wire, John Rabson <= LF: Re: Soldering enamelled copper wire, mal hamilton LF: Re: Re: Soldering enamelled copper wire, Uwe Wensauer LF: RE: Re: Re: Soldering enamelled copper wire, victor13 LF: Re: Re: Re: Soldering enamelled copper wire, mal hamilton Re: LF: Re: Re: Re: Soldering enamelled copper wire, Andy Talbot Re: LF: Re: Re: Re: Soldering enamelled copper wire, Scott Tilley Re: LF: Re: Re: Re: Soldering enamelled copper wire, g4gvw LF: Re: Soldering enamelled copper wire, John Rabson LF: RE: Re: Soldering enamelled copper wire, victor13 Re: LF: RE: Re: Soldering enamelled copper wire, John Rabson

Previous by Date:	LF: Re: VX9MRC, mal hamilton
Next by Date:	Re: LF: ARGO settings, Mike Dennison
Previous by Thread:	LF: Re: VK9MRC, Chris
Next by Thread:	LF: Re: Soldering enamelled copper wire, mal hamilton
Indexes:	[Date] [Thread] [Top] [All Lists]