Hi Stefan
If you see below, Ofocm have asked me to demosntrate some
calculations to show my ERP. any help on providing a "robust" and
"defendable" response would be appreciated if you can help me.
I'll be using an inv l antenna 10m/40m fed via a 1.4H coil or
perhaps LOPT. Tx output will be from an audio amp at 200W running
QRSS across a freq range of say 6khz to 10khz.
My earth conditions are fair to poor with average soil quality
and a several rods and radials but no great expanse of buried copper.
could you send me some numbers I can then forward back to Ofcom.
i'm guessing that with a limited set up such as that the ERP
will be in the nanowatt/femtowatt ranges
thanks in advance for any help
with best regards
jim G7NKS
Hello James,
As you know we are now progressing the applications for a SRP NoV for
9kHz and we need a element of clarification concerning yours please.
We have observed what might be an anomaly relating to the calculated
efficiency referred to on the page titled “Proposals for Site”. Could
you please provide us with figures that were used to arrive at the
power levels quoted under ERP?
An early response would be welcomed in order that we can put all of the
3 current applications to the Met Office as one offering.
Any concerns please let me know.
73
Rod (G3TXA)
Rod Wilkinson
OLC Senior Associate, Amateur Radio
020 7783 4488 (direct line)
[email protected]
Ofcom
Riverside House
2a Southwark Bridge Road
London SE1 9HA
020 7981 3000
www.ofcom.org.uk
2010/9/8 Stefan Schäfer
<[email protected]>
LF,
This weekend i saw the first time IK1HSS and RA3YO (disturbed by my own
transmission from France) in my QRSS-60 grabber window.
Tnx to them for the activity!
73, Stefan