Return to KLUBNL.PL main page

rsgb_lf_group
[Top] [All Lists]

Re: LF: LF/VLF

To: [email protected]
Subject: Re: LF: LF/VLF
From: Mike-WE0H <[email protected]>
Date: Sat, 12 Jun 2010 22:47:02 -0500
In-reply-to: <E5DAA5EB987946EB9B10AB24BBD6CD98@D2FCLG81>
References: <002401cb096b$7d950560$0401a8c0@xphd97xgq27nyf> <[email protected]> <[email protected]> <003a01cb097f$640755d0$0401a8c0@xphd97xgq27nyf> <[email protected]> <D37600A2E38841DD9394FBD7B49FDC0C@D2FCLG81> <[email protected]> <E5DAA5EB987946EB9B10AB24BBD6CD98@D2FCLG81>
Reply-to: [email protected]
Sender: [email protected]
User-agent: Thunderbird 2.0.0.24 (X11/20100317)

Hi Roger,

On 600m, I would not worry about using a vertical hanging in trees. On 1750m and 2200m, the vertical's signal will get eaten up by those trees. I am using a 70' inverted L vertical on 600m that is hanging in tall oak trees. The vertical portion is within 5' of one tree. There are about 27 trees in my quarter acre lot so you get an idea of what I am working with. I don't have an issue radiating a decent signal on 600m with this antenna with anywhere from 3w QRP to 100w. My CW by the ear at 3w is a bit over 100 miles and at 100w it has been heard at 274 miles. All at high noon daylight. At night that 3w goes out around 800 miles and 100w goes 1000+ miles by the ear copy on a good winter night.

So, use a vertical wire in the trees on 600m, it'll be fine. If you want a TX loop, then a TX loop built as an Ashlock Loop, will work on any band, in the woods with heavy trees or out in a bare field with a couple towers to hang it on.

Mike
WE0H
EN35hj


Roger B wrote:
Thanks Mike,

I noticed after I sent my question that you were referring to Part 5 - Sorry
for asking a stupid question. However, on another subject, do you feel the
advantage to using a transmitting loop over a vertical might hold as well on
600m?

Roger KL7Q (WD2XSH/28)


<Prev in Thread] Current Thread [Next in Thread>