Return to KLUBNL.PL main page

rsgb_lf_group
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

Re: LF: DLVLF 8.97kHz tests

from [Stefan Schäfer] [Permanent Link][Original]
To: [email protected]
Subject: Re: LF: DLVLF 8.97kHz tests
From: Stefan Schäfer <[email protected]>
Date: Thu, 10 Jun 2010 01:05:03 +0200
In-reply-to: <53EF46B489244A09B02F194D6CD79DAB@df2py>
References: <[email protected]><[email protected]><[email protected]><[email protected]><[email protected]><[email protected]> <[email protected]> <53EF46B489244A09B02F194D6CD79DAB@df2py>
Reply-to: [email protected]
Sender: [email protected]
User-agent: Mozilla/5.0 (Windows; U; Windows NT 6.1; de; rv:1.9.1.8) Gecko/20100227 Thunderbird/3.0.3
Wolf,

You are running 2,9 kVA or really 2,9 kW? Impressing! Which PA are you using? This is the advantage of having a mains connection! ;-) For a loop this is no problem but if i apply that power on my kite antenna i would get 71 kV rms. That would be possible for the coil but no for the small wire...

73, Stefan


Am 09.06.2010 19:28, schrieb Wolf Ostwald:

Hello Group !

DLVLF transmitting a continous carrier now on 8970 Hz ( Supposedly ). I may be off somewhat, but Marco runs his calibrated card on my signal, if I still cant produce a trace on Stefan`s grabber about 80 km away, running 22 amps into a 6 Ohm antenna, then a loop is no good to TX VLF. I keep u posted.

73 de wolf

 

[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  Re: LF: DLVLF 8.97kHz tests, Stefan Schäfer
Next by Date:  Re: LF: DLVLF 8.97kHz tests, Mike.WE0H
Previous by Thread:  Re: LF: DLVLF 8.97kHz tests, Mike.WE0H
Next by Thread:  LF: PA für DLVLF 8.97kHz tests, Wolf Ostwald
Indexes:  [Date] [Thread] [Top] [All Lists]