Hi Graham, LF,

 

You wrote :-

>>>Upload is set at 5 minute intervals and auto refresh at 2 minute intervals. <<< that could be backed off to  15 mins as the beacon only  sends every 15 ??

 

I mentioned in my previous mail to ignore the text on the page as it was originally for grabber 1 for when I upgrade the web site (to a new design & better navigation etc), also mentioned is that upload is every 30 minutes.

 

If the uploaded chart proves useful or interesting to operators & viewers then I will change the text & make it a permanent feature for the foreseeable future.

 

BTW :-

 

For those of you  who are not familiar with the chart –

 

The RED trace is Andy’s (G4JNT) beacon signal & the BLACK trace is the noise level at my QTH.

 

The Blue & GREEN are not in use & should be ignored on this chart as they are for the other beacons used when monitoring on the 5MHz allocation.

 

Cheers,

 

Gary – G4WGT

 

 

---

From: [email protected] [mailto:[email protected]] On Behalf Of Graham
Sent: 15 March 2009 22:17

To: [email protected]

Subject: Re: LF: RE: Syncback software

 

Gary..

 

That looks good  ... 0500 looks best time for a qso .. see you then  

 

>>>Upload is set at 5 minute intervals and auto refresh at 2 minute intervals. <<< that could be backed off to  15 mins as the beacon only  sends every 15 ??

 

the  15 db over the noise in day time is the  same at this qth .. looks like the big dips round 1900  where just when we where testing ..  typical hihi

 

tnx- G ..

 

From: Gary - G4WGT

Sent: Sunday, March 15, 2009 7:55 PM

To: [email protected]

Subject: LF: RE: Syncback software

 

LF,

 

I have now got the software, Syncback running correctly (I think).

 

The purpose of this is to upload the chart from Andy’s beacon as received here to my web site periodically, ie. every 30 minutes.

 

I now have a receiver running 24/7 monitoring Andy,s beacon on 503.7KHz.

 

You can view the chart on my web site at :-

 

http://myweb.tiscali.co.uk/wgtaylor/grabber3.html

 

For the moment ignore the text on the page as it is originally designed to use with the 500KHz grabber when I renew my web site design. If it is a useful upload I will make it a permanent feature but may have to extend the frequency coverage of grabber 1 so not to overload the PC with operations which will cause the PC to struggle.

 

Let me have your comments please.

 

73

 

Gary – G4WGT.

 

---

From: [email protected] [mailto:[email protected]] On Behalf Of Gary - G4WGT
Sent: 15 March 2009 16:10
To: LF -RSGB LF Group
Subject: LF: Syncback software

 

Hi LF,

 

If anyone is using Syncback software & can help, please.

 

I am tying to upload a file to my website who’s filename does not change, only the file size changes. I tried to do it with Argo-upload but failed so I downloaded Syncback & still failing.

 

Syncback gives me the following message :-

 

**********************************

Can connect, but unable to change to destination directory:

/chart01.bmp:not a directory

**********************************

The Syncback help does not give me the answer.

 

Any help will be appreciated

 

Or

 

Will Argo-Upload do it?

 

Or

 

Is there something else to do it?

 

Thanks in anticipation,

 

73,

 

Gary - G4WGT - IO83QP.

 

---

No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.0..237 / Virus Database: 270.11.13/2001 - Release Date: 03/14/09 06:54:00