Hi
Graham, LF,
The
original HTML Code for the 2 minute refresh is still inserted into the page
format, so upload is 30 minute intervals with Syncback & 2 minute refresh.
I have left the refresh in case I revert back to the original grabber page. I
will look at changing it if I continue to use the beacon chart upload.
I would
like to have feedback from the LF group regarding the page, if you check it out
periodically, is it useful to you, what are you looking for.
You can
view the chart on my web site at :-
http://myweb.tiscali.co.uk/wgtaylor/grabber3.html
73
Gary –
G4WGT.
The page seemed to refresh quite often ... are there
two settings ?
Sent: Monday,
March 16, 2009 10:40 AM
Subject: RE: LF:
RE: Syncback software
Hi
Graham, LF,
You
wrote :-
>>>Upload
is set at 5 minute intervals and auto refresh at 2 minute intervals.
<<< that could be backed off to 15 mins as the beacon only
sends every 15 ??
I
mentioned in my previous mail to ignore the text on the page as it was
originally for grabber 1 for when I upgrade the web site (to a new design &
better navigation etc), also mentioned is that upload is every 30 minutes.
If the
uploaded chart proves useful or interesting to operators & viewers then I
will change the text & make it a permanent feature for the foreseeable
future.
BTW :-
For
those of you who are not familiar with the chart –
The RED
trace is Andy’s (G4JNT) beacon signal & the BLACK trace is the noise
level at my QTH.
The Blue
& GREEN are not in use & should be ignored on this chart as they are
for the other beacons used when monitoring on the 5MHz allocation.
Cheers,
Gary
– G4WGT
That looks good ... 0500 looks best time for a qso ..
see you then 
>>>Upload is set
at 5 minute intervals and auto refresh at 2 minute intervals. <<< that
could be backed off to 15 mins as the beacon only sends every 15 ??
the 15 db over the
noise in day time is the same at this qth .. looks like the big dips
round 1900 where just when we where testing .. typical hihi
Sent: Sunday,
March 15, 2009 7:55 PM
Subject: LF: RE:
Syncback software
LF,
I have
now got the software, Syncback running correctly (I think).
The
purpose of this is to upload the chart from Andy’s beacon as received
here to my web site periodically, ie. every 30 minutes.
I now
have a receiver running 24/7 monitoring Andy,s beacon on 503.7KHz.
You can
view the chart on my web site at :-
http://myweb.tiscali.co.uk/wgtaylor/grabber3.html
For the
moment ignore the text on the page as it is originally designed to use with the
500KHz grabber when I renew my web site design. If it is a useful upload I will
make it a permanent feature but may have to extend the frequency coverage of
grabber 1 so not to overload the PC with operations which will cause the PC to
struggle.
Let me
have your comments please.
73
Gary
– G4WGT.
Hi LF,
If anyone is using Syncback software &
can help, please.
I am tying to upload a file to my website
who’s filename does not change, only the file size changes. I tried to do
it with Argo-upload but failed so I downloaded Syncback & still failing.
Syncback gives me the following message :-
**********************************
Can connect, but unable to change to
destination directory:
/chart01.bmp:not a directory
**********************************
The Syncback help does not give me the
answer.
Any help will be appreciated
Or
Will Argo-Upload do it?
Or
Is there something else to do it?
Thanks in anticipation,
73,
Gary - G4WGT - IO83QP.
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.0.237 / Virus Database: 270.11.13/2001 - Release Date: 03/14/09
06:54:00
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.0.237 / Virus Database: 270.11.15/2003 - Release Date: 03/15/09
14:07:00
