Hi Jim, John, Graham, Gary, LF Group,
With one month remaining on the NoV (before renewal!!) I thought it time to
put the station on the air.
It's taken long enough to put it all together, from nothing!
My junk box doesn't normally contain much in the line of RF parts, HI.
So thought I have a try at WSPR and see who hears my mere 10mW first
transmission.
Well to be honest I'm most surprised with the reports from GM4SLV @
700miles.
Thanks for tuning down for a listen, John.
Apologies to Gary for transmitting on his frequency on the first
transmission.
I don't think we doubled as it turns out, since you gave me a report!!
I have an odd issue too with the sound card I use in that the TX/RX
frequencies are about 12Hz different,
But this is only when using the WSPR software.
Hence two corrections, first to line Jim up on RX then another to get my TX
frequency where I intended 503.930kHz.
Thanks go to those who have given words of advice from time to time over the
past 6 months.
And John Gould (RSGB HF Manager) for giving me some encouragement in the
first place to attempt the NoV application and also for giving it the once
over before it was officially posted.
73,
Lee M0LMH,
IO93gx
-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of Graham
Sent: 28 January 2009 00:29
To: [email protected]
Subject: LF: M0LMH in WSPR had to look twice !
Thought I had a false decode of Jim .. but it was real hi
090128 0010 18 -13 0.9 0.503930 M0LMH IO93 10 0 1 0
090128 0012 34 3 0.6 0.503900 M0BMU IO91 30 0 1 0
090128 0018 30 -2 0.5 0.503900 M0BMU IO91 30 0 1 0
090128 0018 19 -11 0.8 0.503931 M0LMH IO93 10 0 1 0
Something is very wrong with the lf set up I did not decode Gary all night
and not all of Jims signals decoded either
So using the ft897-d with the ads/usb sound card , every trace is decoding
so .. looks like the sound card is the problem as the rx and tx had similar
problems ..
wonderful ...
G ..
|
