Gary - G4WGT wrote:
> I can get John's grabber at :-
> http://www.sighthound.demon.co.uk/gm4slv/grabber2.htm
> or
> http://www.sighthound.demon.co.uk/gm4slv/gm4slv_136800.jpg
>
> But at the moment but it appears to be off line.
>
Hello Rik, Gary et al,
My 500kHz grabber is, in general, offline at the moment. Occasionally I
run a temporary setup, as when Paul-Henrik was testing on 136 recently,
using my IC-R75 - which is my main "user" receiver and can't be
dedicated as a grabber RX. I am running out of receivers and PCs to be
able run 24/7 monitoring of everything I'm interested in, so things
change occasionally as the fancy takes me.
Currently I'm set as follows:
RX / Ant / PC number / Use
URL for received data
AR7030 / ALA1530 / PC#1 / 5MHz Beacons
http://g4irx.nowindows.net/fivemegs/comparison.php
IC-718 / HF wire / PC#2 / 2187.5kHz MF-DSC
http://www.sighthound.demon.co.uk/gm4slv/currentmessages.txt
IC-R75 / MF vertical / PC#3 / 500 or 136 WSPR OR 518 NAVTEX
http://wsprnet.org/meptspots.php?mode=html&band=2190
or
http://www.frisnit.com/cgi-bin/navtex/view.cgi - look for the GM4SLV link...
Homebrew phasing RX ALA1530 2182kHz speaker monitoring
Occasionally I'll retune the IC-R75 to either 500 or 137 and run the
grabber, but this is on an "as needed" basis.
If anyone has a desire for remote grabber then let me know and I'll set
it up for the period of your tests.
Cheers,
John
|
