Return to KLUBNL.PL main page

rsgb_lf_group
[Top] [All Lists]

RE: LF: Re: RE: Re: QRSS - KN ?

To: [email protected]
Subject: RE: LF: Re: RE: Re: QRSS - KN ?
From: "Gary - G4WGT" <[email protected]>
Date: Fri, 11 Feb 2005 15:46:23 -0000
Importance: Normal
In-reply-to: <[email protected]>
Reply-to: [email protected]
Sender: [email protected]
Hi All,

You could work DXCC on LF without switching the gear on !!!!!!!

Regards

Gary - G4WGT

Web: http://myweb.tiscali.co.uk/wgtaylor

-----Original Message-----
From: [email protected]
[mailto:[email protected]]On Behalf Of Johan Bodin
Sent: 11 February 2005 16:38
To: [email protected]
Subject: Re: LF: Re: RE: Re: QRSS - KN ?


captbrian wrote:
 Let it be understood that "best wishes to any ham station contacted"  is
default mode . Then  one need send nothing unless  these wishes are to be
cancelled ? The 'undo' code for that could be "37"

I like the idea of omitting default information from the transmission.
This philosophy can be extended even further: Default QSOs can be had
without sending anything at all! Signal reports are not needed as no
signals are transmitted. No need to send your own callsign because the
other station doesn't listen anyway and no need to send his callsign
because he already knows it.

Information that deviates from the default can be sent through another
channel e.g. e-mail.

There is a lot of advantages. For example, a considerable reduction of
both transmitter power and antenna size is possible. It may even be
possible to use an artificial antenna.

See:
http://www.winforce.org.uk/MMARS/aa-licence.htm

73
Johan SM6LKM


--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.300 / Virus Database: 265.8.7 - Release Date: 2005-02-10


--
No virus found in this incoming message.
Checked by AVG Anti-Virus.
Version: 7.0.300 / Virus Database: 265.8.6 - Release Date: 07/02/2005

--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.300 / Virus Database: 265.8.6 - Release Date: 07/02/2005


<Prev in Thread] Current Thread [Next in Thread>