Return to KLUBNL.PL main page

rsgb_lf_group
[Top] [All Lists]

LF: Re: Re: SAT

To: [email protected]
Subject: LF: Re: Re: SAT
From: "hamilton mal" <[email protected]>
Date: Sun, 18 May 2003 08:16:12 +0100
References: <[email protected]> <[email protected]>
Reply-to: [email protected]
Sender: <[email protected]>
----- Original Message -----
From: "Stewart Nelson" <[email protected]>
To: <[email protected]>
Sent: Saturday, May 17, 2003 2:09 PM
Subject: LF: Re: SAT


Hi Mal and all,

If you can receive an analog program from the same satellite, use that
to align your dish, etc.  If you have no sparklies, or only a few, the
signal should be good enough for digital.

Hi Stewart

Tnx your observations. My digital system is the correct package for the job,
correct dish, lnb, cable etc.

I get a signal indicated sometimes on the TV baragraph but it will not lock.
I need some sort of device to accurately point the dish towards the
satellite. The normal procedure used for analogue pointing does not seem to
work for digital.
Some sort of rapid reaction meter is needed inline between the lnb and RX.
I could make one if I had a suitable cct. I do not have a spectrum analyizer
for the ghz freqs otherwise that would be the answer.
73 de Mal/G3KEV







<Prev in Thread] Current Thread [Next in Thread>