Return to KLUBNL.PL main page

rsgb_lf_group
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

LF: push/pull

from [jannsen] [Permanent Link][Original]
To: [email protected]
Subject: LF: push/pull
From: "jannsen" <[email protected]>
Date: Sun, 12 Jan 2003 22:42:09 +0100
References: <[email protected]> <[email protected]>
Reply-to: [email protected]
Sender: <[email protected]> 
Hi all,

guess many of you built the G0MRF-Quarter-Kilowatt-Amplifier.
I did. the PSU is not finished yet.
got some trouble with the phase of the 137kHz sines (es triangular and rectangular) measured at the gates of the MOSFETs. 
there is a diff btwn the two channels of estimated 10degr.
that means parasitic oscillation if operating the PA, doesn`t it.
for hours I try to set the diff to zero by changing the windings of the input coils (T1)and by changing the MOSFETs. no success. abt 10degr is the min. the ampludes are ok. 

see attachment.

any hint ?

regards
Uwe/dj8wx

JPEG image

[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  Re: LF: Jason Beacon signals, James Moritz
Next by Date:  Re: LF: Re: QRSS Monitoring 12-13 Jan, Dexter McIntyre
Previous by Thread:  Re: LF: Re: QRSS Monitoring 12-13 Jan, Dexter McIntyre
Next by Thread:  Re: LF: push/pull, James Moritz
Indexes:  [Date] [Thread] [Top] [All Lists]