Hello Scott, With some imagination one can see a trace on my LD_DX grabber in the QRSS-120 window (http://www.iup.uni-heidelberg.de/schaefer_vlf/DK7FC_LF_DX_Grabber.html) arround 4 UTC at 137.778 kHz
Hi Scott, you may be doing a little better than you think: The 600 m^2 loop above ground should have a radiation resistance Rrad = 62299 ohm * 600^2 / 2200^4 = 0.96 milliohm. Fed by 30 A, this would
Thanks Warren Oppps! So use to living in the milli world! Scott On 9/9/2010 1:11 AM, Warren Ziegler wrote: Scott, Surely you mean a conservative 0.5 W rather than 0.5 mW ! -- 73 Warren K2ORS WD2XGJ W
Hi Stefan Troubles with the tuner at 1.1KW as one of the caps got too warm for comfort. At 1.1KW, 30A into 600m^2 loop. Presently running 400W with 18A. I'll need to wait for the rest of the G3 micas
Thanks for the link Stefan. DCF39 made a brief appearance at sunset here. For the first time this side of summer it pushed the DCF39 plot on my website up about 10dB over the noise. Last winter DCF39
Hello Scott, Which antenna current do you get from 1.1 kW? You have a loop antenna, right? Which area, pse? 73, gl, Stefan PS: Nil here seen so far... Am 09.09.2010 02:47, schrieb Scott Tilley: I'm g
I'm going to bump up the juice from 400W to 1.1KW (MOALFA Stun mode) tonight. +4dB. 137778.0 +0.25Hz DAH, DFCW120, my sunset to sunrise. According to the my most conservative calculations that will b