Hello Roland, Copied your PSK08 transmission in JO42FD, using an SDR-IQ on an untuned HF dipole. voJ DFCW3 PSK31 PSKĜ8 MSK31 MSKĜ8 QPSK31 FSK31 CHIRPED HELL - PLEASE QSL VIA DL3NDR at DARC.DEn DI2AT
At 22.00 09/03/2008, Wolf wrote: Hello Roland, Copied your PSK08 transmission in JO42FD, using an SDR-IQ on an untuned HF dipole. ... In PSK31, no decode, the signal barely visible on the spectrogram
Hello Roland, last night bad decoding in PSK08 from yur beacon because many QRN (statics) on MF bands. Are you ready for this night to operate the beacon with same mods ? Maybe better conditions with
Hi Wolf, I just set up a signal generator (HP 8643A) at QRL (100m from QTH) radiating an AM-modulated 10148 kHz PSK08 signal, modulated at 80% by a 1kHz tone, so that I have two good sidebands at 101
Hallo F4DTL yes of course. Some days more. Good luck 73 Roland [email protected] schrieb: Hello Roland, last night bad decoding in PSK08 from yur beacon because many QRN (statics) on MF bands. Are you re
Hello Wolf Thank you for the interesting report. Yes I got generally much better reports with PSK08. To my Station: PC, Software Defined Tranceiver of Softrock RXTXv6.2, preamplifier, PA 70W. Antenna
Hello Marco Thank you for the interesting report. Generally I got much better reports with PSK08. PSK08 had been received almost error free. To my Station: PC, Software Defined Tranceiver of Softrock
Hi Roland and Marco, Marco IK1ODO wote: Interestingly, the opposite here... not able to copy the PSK08, but some acceptable copy in PSK31: Indeed .. maybe the longer path suffers more from slow phase
Hi Marco, RR - I was looking for your QRPPP signal on 10.14X MHz, and it doesn't cause QRM here ;-) At the moment I can see neither the AM carrier nor the PSK-modulated sidebands; but that may change
At 13.17 10/03/2008, you wrote: Hello Marco Thank you for the interesting report. Generally I got much better reports with PSK08. PSK08 had been received almost error free. To my Station: PC, Softwar
DI2AT is transmitting PSK31 and PSK08 on 505.145kHz from 19:00 UTC with 70W output about 1W ERP. PSK08 can only be received with Spectrum Lab DI2AT is transmitting PSK31 and PSK08 on 505.145kHz from
DI2AT is transmitting PSK31 and PSK08 on 505.145kHz from 19:00 UTC with 70W output about 1W ERP. PSK08 can only be received with Spectrum Lab Reports are very welcome. 73 Roland DI2AT/DL3NDR
DI2AT is transmitting PSK31 and PSK08 on 505.145kHz from 19:00 UTC with 70W output about 1W ERP. PSK31 con be received with a lot of different Programs. PSK08 can only be received with Spectrum Lab R
