Dear Stefan, the results from WRC12 ( not only for Hamradio ) have to be implemented in the german rules and papers. I think that is a lot of work. How much time that takes - I don't know. Possibly m
My first permit for MF ( DI2AG ) is dated 1.1.2005. I still hold it. The QRG was 440KHz, bandwidth 200Hz. ( I used 440.044KHz for better ARGO-reception ) On the same QRG were two NDB's: - DRE Dresden
All MF, qrg DI2AF and DI2AG: We suggest 503. Tnx Mal for your proposal about our new calls DI75AF and DI75AG. Will ask the officials ;-) 73 Walter -- Original Message -- From: [email protected]
Ge, Lubos, ok abt 503 fer ur acty. Hw abt 503.5 fer DI2AF es DI2AG? 73 -- Original Message -- From: [email protected] Lubos OK2BVG To: [email protected] _RSGB_LF Sent: Saturday, April 14,
To All German experimentel stations with DI-callsign on 505.1KHz +/-100Hz are now allowed to make duplex-qso's with amateur-radio stations on any amateur radio frequency and with other stations holdi
All MF, the german experimental station DI2AG got a short term permit for 501-504KHz. It is valid from 4.12 to 4.18. Power will be 1W ERP to a backyard antenna 10m up and 35m long. Would be glad to w
Wolf, my progblem is - I have only one wire for 600m, 80m and 40m. So switching with all the inside- and outside coils and tuning takes a lot of time. I think it is the same with DI2AF. 73 Walter DI2
Dear friends, the "old" reflektor did a good job. I learned a lot there. Many thanks to All who kept him working all the years. In my opinion there was no necessity to have a new one. The few spams w
Uwe, DJ2LF and DK6NI do not use more than 1W ERP. Maybe your QTH has lower noise than ours here near Erlangen. We will meet - i am sure. But sri. 73 Walter DJ2LF -- Original Message -- From: uwe-jann
Tnx Albert for info. Nw CQ on 472.5KHz, seems to be free here. 73 Walter Walter, The carrier of the beacon BIA is on 474 kHz (AM 1kHz) the side bands are on 473 en 475 kHz. Albert PA0A
Stefan, tnx fer info and ok abt ur "ground antenna". Here QRN low at this moment. We should give the dipole (really? don't know) a chance, so from time to time will listen. I am just testing a simple
Stefan, me too, pse. 73 Walter DJ2LF MF, For the homebrewers, here is my prototype of a MF class D PA that operates at 12 V DC. Input frequency is divided by 4, so a normal HF TRX can be used (set to
Mal, let us make our QSO at 21 utc I am CQ nw on 473 but think condx not yet ok. 73 Walter DJ2LF/DI2AG From: [email protected] mal hamilton To: [email protected] rsgb Sent: Wednesday,
Horst, as you already did in earlier times you do now: Standing besides the road and tell to hard working people what they should have done better. Note: If the MF-regulation does not meet your needs
