Dear all,
I just uploaded a now beta-release of SlowJT9 (v0.9.10).
The changes are
- JT9-2 and JT9-5 parameters changed to the original ones. The slightly slower baudrates make better advance of the transmission cycle. In theory this should improve S/N by 0.46 dB for
JT9-2 and 0.74 dB for JT9-5.
Be aware that due to the baudrate changes there is NO BACKWARD COMPATIBILITY for JT9-2 and JT9-5.
In other words: JT9-2 and JT9-5 send with v0.9.10 cannot be decoded with prior versions
(v0.9.00 - v0.9.03) and vice versa.
The JT9-1 mode however is still the same and can be sent / received with all versions (and is WSJT-X compatible).
- JT9-10 mode (10 minute cycle) added, for the fearless.
I briefly tested v0.9.10 for in JT9-2 mode and it seems to decode (at least) at the same level as for the previous versions. But to determine a difference of 0.4dB, more extensive tests are needed.
The sole purpose of this version is to determine how JT9-2, and eventually JT9-5, behave in relation to the previous versions, so we can decide wether SlowJT9 will proceed with the original parameters (anno 2013) that imply an odd baudrate ratio
between the JT9 submodes or my previous parameters, with "round number" ratios.
Therefore all test reports, remarks, suggestions and opinions are most welcome.
For the same reason no other changes are applied.
Whoever is interested can download the SlowJT9 installation file at http://472khz.org/SlowJT9/SlowJT9_setup.exe.
For now only a Windows version of SlowJT9 is available. But as the used IDE has cross platform facilities it should be possible to support other operating systems as well in the future.
