Re: LF: Slow JT9 modes...

[DK7FC <selberdenken@posteo.de>]

Chris,

There is a thunderstorm directly over my roof! The tree is still alive ;-)
I think it makes no sense to try now on LF.
Maybe it is better that i do some tests with a local TX signal before 
waiting for signals coming in from the far field.
Thanks for TXing.

73, Stefan


Am 06.09.2018 20:41, schrieb Chris Wilson:
> Hello DK7FC,
>
> First TX at 18:45 my time.
>
> Thursday, September 6, 2018, 7:09:37 PM, you wrote:
>
>    
> > Hi Chris,
> >      
>    
> > Yes, that should work too. Or, can you reduce the power by 6 dB and then
> > work into the WSPR-15 range? If your PA permits.
> > You need that auto-variometer :-)
> >      
>    
> > I'm ready. Tell me when the first transmission is running.
> >      
>    
> > 73, Stefan
> >      
>    
> > Am 06.09.2018 20:02, schrieb Chris Wilson:
> >      
> > > Hello Stefan, it will have to be on my normal 137.550 as I do not have
> > > time tonight to re-tune the coil. I need to take the dogs out then I'll
> > > swap  the  antenna  over  and  give it a go. Let me know if 137.550 is
> > > acceptable. Thanks.
> > >
> > > Thursday, September 6, 2018, 6:34:03 PM, you wrote:
> > >
> > >
> > >        
> > > > Hello Chris,
> > > >
> > > >          
> > >        
> > > > I've sorted out some bugs in the configuration, now i should be ready to
> > > > receive.
> > > > Can you give me a feedback, are you on air? Which TX frequency?
> > > >
> > > >          
> > >        
> > > > 73, Stefan
> > > >
> > > >          
> > >        
> > > > Am 06.09.2018 15:07, schrieb Chris Wilson:
> > > >
> > > >          
> > > > > Hello Stefan,
> > > > >
> > > > > Yes, I can run WSPR-15 OK and have done many times. I drop the voltage
> > > > > to  the PA in deference to heat production but it works fine if anyone
> > > > > is listening :)
> > > > >
> > > > >            
> > >
> > >
> > >        
>
>
>