Return to KLUBNL.PL main page

rsgb_lf_group
[Top] [All Lists]

Re: LF: RE: 300 mA on 8270 Hz

To: "[email protected]" <[email protected]>
Subject: Re: LF: RE: 300 mA on 8270 Hz
From: VIGILANT Luis Fernández <[email protected]>
Date: Sun, 24 Sep 2017 14:17:44 +0000
Accept-language: es-ES, en-US
In-reply-to: <[email protected]>
References: <[email protected]> <[email protected]> <[email protected]> <[email protected]> <579355A36AEE9D4FA555C45D556003AB9AA21EE2@servigilant.vigilant.local>,<[email protected]>
Reply-to: [email protected]
Sender: [email protected]
Thread-index: AQHTMx3BA9ZH/xyBwEmiBV36P9JNDaLA6UpAgAFGOACAAd9mWQ==
Thread-topic: LF: RE: 300 mA on 8270 Hz
Hi Stefan, VLF

Yes. I agree there is work to be made reducing the noise picked by the antenna. Or directly looking for
an alternative Rx site which less noise

The VLF Rx is already running at my remote Rx location at 7Km from Benidorm. But it is a populated area
with close neighbours, street lights, etc. The probe is on top of the roof in a 6m pole. Last 1m section made
with PVC pipe. The location is IM98xn, close to the sea and not very high.

The antenna probe is 1m alu rod 10mm diameter. The MiniWhip is also attached to the last 1m PVC pole

I'm using one of your designs, with separated front end right at the probe and the rest down in the shack
using about 20m 75Ohm TV coax. The details can be found at G3XBM site (fully recommended)

Will be hard to reduce the noise at this site. So the "B plan" is to build a new E probe and use an spare PC
to setup a new receiver. I will test this in different locations I can "borrow" and find if it works in any of them

But first in my "To-Do" list is VLF. I'm almost ready to go with 100w just needing some more work

Keep tuned ! ;-)

73 de Luis
EA5DOM
<Prev in Thread] Current Thread [Next in Thread>