Return to KLUBNL.PL main page

[Top] [All Lists]

LF: RE: 300 mA on 8270 Hz

To: "[email protected]" <[email protected]>
Subject: LF: RE: 300 mA on 8270 Hz
From: VIGILANT Luis Fernández <[email protected]>
Date: Fri, 22 Sep 2017 13:41:47 +0000
Accept-language: es-ES, en-US
In-reply-to: <[email protected]>
References: <[email protected]> <[email protected]> <[email protected]> <[email protected]>
Reply-to: [email protected]
Sender: [email protected]
Thread-index: AQHTMx3BA9ZH/xyBwEmiBV36P9JNDaLA6UpA
Thread-topic: 300 mA on 8270 Hz



May be too late L


I have just started FFT recording with SLab

Not sure if the settings are correct for your transmission


In File Export Format > Export of FTT results>

Number of exported FFT bins 1204

frequency of first FFT bin 0.0

Max file size in Kb 0 (unlimited)


FFT Settings:

Effect of FFT settings with fs= 1.37175 Hz:

Width of one FFT-bin: 41.8625 uHz

Equiv. noise bandwidth: 62.7938 uHz

Max freq range: 8.26966 kHz .. 8.27034 kHz

FFT window time (length): 6.635 hrs

FFT window overlap: 74.9 %


73 de Luis



De: [email protected] [mailto:[email protected]] En nombre de DK7FC
Enviado el: jueves, 21 de septiembre de 2017 23:02
Para: [email protected]
Asunto: VLF: 300 mA on 8270 Hz



My new VLF coil is now in operation. It is designed to run 300 mA. The first station where i like to transmit some messages is 8270 Hz, just because 36 km it is the easiest band on the VLF frequencies available for us. The idea is to transmit at least 100 hours on each band down towards DC, just to proof the design.
Does someone like to join the experiments, RX or TX wise?

I'm going to start a first transmission tomorrow morning using EbNaut:

f = 8270.005000 Hz
Start time: 22.September.2017  06:00:00 UTC
Symbol period: 24 s
Characters: 12
CRC bits: 16
Coding 16K21A
Duration: 11h,31min,12sec
Antenna current: 300 mA

73, Stefan

<Prev in Thread] Current Thread [Next in Thread>