As far as I can see the transmission is on the nominal frequency. I needed the offset because I had set my center frequency to 136171 Hz, minus 0.0175 Hz due to known RX DDS rounding.

 

The sequences seem to be somewhere between 0.9 and 1.4 seconds behind UT. I can't tell better because I'm currently decimating to a fairly low samplerate, introducing significant timing granularity. In the past, Domenico sometimes suffered from a GPS ambuiguity which gave him a one second clock error.  

 

Best 73,

Markus

 

-----Ursprüngliche Mitteilung-----
Von: Andy Talbot <[email protected]>
An: rsgb_lf_group <[email protected]>
Verschickt: Do, 19 Nov 2015 6:49 pm
Betreff: Re: LF: EbNaut LF test from iz7slz

Also, looking at the log.txt file, there is 0.98Hz error showing.   Is this a value that MUST be entered, or can the software derive it?

Andy

On 19 November 2015 at 17:30, Markus Vester <[email protected]> wrote:

Hi Domenico,

 

got your 15, 16 and 17 UT transmissions ok, with Eb/N0 3.1, 11.8 and 9.0 dB respectively.

 

It looks like the symbol timing is a bit over one second late.

 

Best 73,

Markus (DF6NM)

 

-----Ursprüngliche Mitteilung-----
Von: IZ7SLZ <[email protected]>
An: rsgb_lf_group <[email protected]>
Verschickt: Do, 19 Nov 2015 1:04 pm
Betreff: LF: EbNaut LF test from iz7slz

Good day LF, all 

  

 some coherent bpsk test  transmissions with EbNaut are now scheduled  

 from here (JN80NU) on QRG = 136170.00 Hz  every hour starting at 13:00. 

  

 Message is composed of 16 characters with 1s/symbol. Duration of the  

 transmission is 17'20''. Scheme-code is 8K19A. 

  

 Thanks for the attention. 

  

 73, Domenico (iz7slz)