|
-1 Rx ?
18:51 477 PA3ABK de EB3FRN Op8 759 mi -30 dB F:13% in MONTBRIO 1503.9 Hz with
0.5w + Marconi lin. loaded top 45m total
18:51 477 PA3ABK de EB3FRN-1 Op8 759 mi -30 dB F:17% in MONTBRIO 1501.5 Hz
with 0.5w + Marconi lin. loaded top 45m total
Sent: Monday, September 28, 2015 6:37 PM
Subject: Re: LF: Re: 23:35 477 EA5DOM de EB3FRN Op8 Deep Search -36
dB1489.0 Hz
Ok Luis
Yes , had to be something 'loopy' going on , from the
levels , 25 watts should do the job then , was
the level 16 watts before ?
GL with the vertical , if its locations is
where I think it will be : -) you may
not need the variometer , just a tapped coil and
a var-capacitor from a old valve Rx
Are you still sending opera/wspr ?
or just OP8 , no wspr spots showing during daylight
to day ?
73-G,
| 2015-09-28 07:00 |
EA5DOM |
0.475613 |
-28 |
0 |
IM98wn |
0.002 |
EB3FRN |
JN01mc |
300 |
19 |
| 2015-09-28 02:00 |
EA5DOM |
0.475612 |
-25 |
0 |
IM98wn |
0.002 |
EB3FRN |
JN01mc |
300 |
19 |
| 2015-09-28 01:48 |
EA5DOM |
0.475612 |
-24 |
0 |
IM98wn |
0.002 |
EB3FRN |
JN01mc |
300 |
19 |
| 2015-09-28 01:36 |
EA5DOM |
0.475612 |
-25 |
0 |
IM98wn |
0.002 |
EB3FRN |
JN01mc |
300 |
19 |
| 2015-09-28 01:00 |
EA5DOM |
0.475613 |
-26 |
0 |
IM98wn |
0.002 |
EB3FRN |
JN01mc |
300 |
19 |
| 2015-09-27 23:12 |
EA5DOM |
0.475613 |
-25 |
0 |
IM98wn |
0.002 |
EB3FRN |
JN01mc |
300 |
19 |
| 2015-09-27 22:48 |
EA5DOM |
0.475613 |
-26 |
0 |
IM98wn |
0.002 |
EB3FRN |
JN01mc |
300 |
19 |
| 2015-09-27 22:36 |
EA5DOM |
0.475613 |
-26 |
0 |
IM98wn |
0.002 |
EB3FRN |
JN01mc |
300 |
19 |
| 2015-09-27 21:24 |
EA5DOM |
0.475613 |
-27 |
0 |
IM98wn |
0.002 |
EB3FRN |
JN01mc |
300 |
19 |
| 2015-09-27 18:48 |
EA5DOM |
0.475617 |
-25 |
0 |
IM98wn |
0.002 |
EB3FRN |
JN01mc |
300 |
19 |
Sent: Monday, September 28, 2015 4:02 PM
Subject: RE: LF: Re: 23:35 477 EA5DOM de EB3FRN Op8 Deep Search -36
dB1489.0 Hz
Hi Graham
The answer is ... QRO :)
I'm running the 100w PA made by Fausto IK4NMF. Not big
signal increase in local (7km) decodes but
clear difference at 300Km as seen by
EB3FRN
After improving loop matching, PA works at full
power. Fortunately Opera8 keeps the PA almost cold
while a single WSPR-2 period is a real stress test. Loop
match is still far from perfect and stressing
full power modes are not wellcome with this
setup
As
Stefan told, keeping the loop tuned is an endless task and not the way to go for
QRO/Dx
Even
worse for a flat horizontal loop like mine
Next
in the list is going vertical. Coil and variometer on the way. Keep tuned
;-)
Audacity of it , in board
daylight as well
These are all well above the Dynamic switch over level ,
Q question for the propagation dep't , what's
changed ?
local decode levels still -5/-6 dB , but that
path is upto 6 dB less attenuation [ opera > dynamic
s/n still average and same calibration]
73-G,
14:32 477 EA5DOM de EB3FRN Op8 -28 dB F:11% in MONTBRIO 1482.9
Hz
14:20 477 EA5DOM de EB3FRN Op8 -27 dB F:8% in MONTBRIO 1482.7
Hz
14:08 477 EA5DOM de EB3FRN Op8 -29 dB F:8% in MONTBRIO 1482.9
Hz
13:56 477 EA5DOM de EB3FRN Op8 186 mi -28 dB F:8% in MONTBRIO 1482.4 Hz
13:56 477 EA5DOM de EA5DOM-1 Op8 4 mi -6 dB F:14% in Albir 1479,5
Hz
12:44 477 EA5DOM de EA5DOM-1 Op8 -5 dB F:9% in Albir 1479,5 Hz
12:44 477 EA5DOM de EB3FRN Op8 -30 dB F:13% in MONTBRIO 1482.7
Hz
Sent: Sunday, September 27, 2015 1:08 AM
Subject: Re: LF: Re: 23:35 477 EA5DOM de EB3FRN Op8 Deep Search -36
dB1489.0 Hz
Hi, Graham
copying to G6AVK too, with nice signals
23:05 477 G6AVK Op8 1503.9 Hz -25 dB Fade: 2%
I attach a pict from my grabber where can see EA5DOM and G6AVK at the same
time
73! Iban
eb3frn
| 