Hi Graham
The answer is ... QRO :)
I'm running the 100w PA made by Fausto IK4NMF. Not big signal increase in local (7km) decodes but
clear difference at 300Km as seen by EB3FRN
After improving loop matching, PA works at full power. Fortunately Opera8 keeps the PA almost cold
while a single WSPR-2 period is a real stress test. Loop match is still far from perfect and stressing
full power modes are not wellcome with this setup
As Stefan told, keeping the loop tuned is an endless task and not the way to go for QRO/Dx
Even worse for a flat horizontal loop like mine
Next in the list is going vertical. Coil and variometer on the way. Keep tuned ;-)
Audacity of it , in board daylight as well
These are all well above the Dynamic switch over level , Q question for the propagation dep't , what's changed ?
local decode levels still -5/-6 dB , but that path is upto 6 dB less attenuation [ opera > dynamic s/n still average and same calibration]
73-G,
14:32 477 EA5DOM de EB3FRN Op8 -28 dB F:11% in MONTBRIO 1482.9 Hz
14:20 477 EA5DOM de EB3FRN Op8 -27 dB F:8% in MONTBRIO 1482.7 Hz
14:08 477 EA5DOM de EB3FRN Op8 -29 dB F:8% in MONTBRIO 1482.9 Hz
13:56 477 EA5DOM de EB3FRN Op8 186 mi -28 dB F:8% in MONTBRIO 1482.4 Hz
13:56 477 EA5DOM de EA5DOM-1 Op8 4 mi -6 dB F:14% in Albir 1479,5 Hz
12:44 477 EA5DOM de EA5DOM-1 Op8 -5 dB F:9% in Albir 1479,5 Hz
12:44 477 EA5DOM de EB3FRN Op8 -30 dB F:13% in MONTBRIO 1482.7 Hz
Sent: Sunday, September 27, 2015 1:08 AM
Subject: Re: LF: Re: 23:35 477 EA5DOM de EB3FRN Op8 Deep Search -36 dB1489.0 Hz
Hi, Graham
copying to G6AVK too, with nice signals
23:05 477 G6AVK Op8 1503.9 Hz -25 dB Fade: 2%
I attach a pict from my grabber where can see EA5DOM and G6AVK at the same time
73! Iban
eb3frn
|