Return to KLUBNL.PL main page

rsgb_lf_group
[Top] [All Lists]

LF: New RX site at DK7FC

To: <[email protected]>
Subject: LF: New RX site at DK7FC
From: "SV8CS- Spiros Chimarios" <[email protected]>
Date: Wed, 30 Jul 2014 15:30:21 -0000
Importance: Normal
In-reply-to: <[email protected]>
References: <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]>
Reply-to: [email protected]
Sender: [email protected]
Hello Stefan.
Very nice..!! Congrats.
Seem like mine remote location (KM07JR) but unfortunately I have some electric power isolators noise coming from the nearby village.
Good Luck.
73, Spiros/SV8CS
 
 
From: DK7FC
Sent: Wednesday, July 30, 2014 2:57 PM
Subject: LF: New RX site at DK7FC
 
Hi all,

Finally! Finally i have my own piece of garden, since monday. It is outside the city, most probably in a very quiet location. The dimensions are roughly 20m x 80m, i.e. 1600 m^2. The locator is JN49IK24 that's 2.4 km distant from my TX location.

I'm planning to arrange several RX antennas for LF / MF and VLF! (No XYL is limiting the possibilities :-) ).

Later in the afternoon i'm arranging a first antenna, something like a T antenna, maybe in 6m above the ground, tuned to MF just to get a first impression.  MF WSPR test transmissions are welcome! :-) So far i have mobile internet and can upload some WSPR spots.
I will also install 2 orthogonal RX loops later. Same for LF and VLF.

There is no electricity, so no QRM :-) With some luck i can arrange a WLAN repeater in some 15m high trees which are on the property. Solar panels could be mounted into the tree as well as some accumulators in combination with a homemade linear regulating solar battery charger.

There are a lot of possible projects to do. And now it will show how easy it is to get fine RX results if you live in a quiet location, using a clean earth and a large RX antenna that doesn't need a preamp :-)

OK, let's go!

73, Stefan/DK7FC
<Prev in Thread] Current Thread [Next in Thread>