Joe;
If you want to come back to 137 shoot me an e mail-I will move up-there is lots of room!
> Date: Thu, 2 Jan 2014 15:34:23 -0330
> From: jcraig@mun.ca
> To: rsgb_lf_group@blacksheep.org
> Subject: RE: LF: capture 137777/RX OP32
>
> Thanks for the report, Bob and the offer to keep the QRG warm.
> Hartmut's grabber showed that that the sigs disappeared after an
> ID sequence on the tower. The SWR was high and there was probably
> arcing at the tower. The IDer was set to toggle between the tower
> and wire automatically.
>
> The RX is set on 136.00 USB for OP32 tonight as per Graham's note.
> Presently there is a loud AC buzz but DCF39 is very strong. The 100m
> wire is feeding the FT-817 without the usual preamp in line.
>
> 73 GL
> Joe VO1NA
>
> On Thu, 2 Jan 2014, Bob Raide wrote:
>
> > Joe;
> > Your signal was tremendous up until you took short QRT to change ants. But it is always "dog-bone" strong on either ant and I am SW of you. I did see some weak traces on YV7MAE just before you went to change ant. Didn't check back as didn't know you were changing ants-GL tonight and hope you might have OPDS for RX for the real weak ones-Bob, WG2XRS/4, WE2XEB, WE2XGR/6 NY
> >
> >> Date: Thu, 2 Jan 2014 11:41:31 -0330
> >> From: jcraig@mun.ca
> >> To: rsgb_lf_group@blacksheep.org
> >> Subject: Re: LF: capture 137777
> >>
> >> Thanks Henny. Nice capture.
> >>
> >> The tower was misbehaving last night -- the reflected power was leaping
> >> about so on with the snow shoes and up the hill in the dark!
> >>
> >> No smoke in the ATU box so perhaps there were ice/water bridges across
> >> the guy insulators. Will be taking a listen on OP32 tonight.
> >>
> >> 73 & HNY to all
> >> Joe VO1NA
> >>
> >> On Thu, 2 Jan 2014, henny wrote:
> >>
> >>> Gm Joe,LF
> >>> capture 137777
> >>> henny pa3cpm
> >>> 73,s
> >>> Het bericht kan nu met het volgende bijlagen of koppelingen worden verzonden:
> >>> capt00050
> >>>
> >>> Opmerking: Sommige e-mailprogramma's staan ter beveiliging tegen virussen het verzenden of ontvangen van bepaalde bestandsbijlagen niet toe. Controleer de beveiligingsinstellingen voor uw e-mail als u wilt weten hoe bijlagen worden afgehandeld.
> >>
> >
>
