|
Ok Bob
Yes I worked out what was
going on with the distances and s/n , it
seems the map is using another wg2xrs
qth , the s/n levels will be
correct , but the distance is wrong , what you
sending is 'wg2xrs'
I don't think Opera can
send the /4 at the end , but the web
beacon will send anything that's entered , if
another station sends , then the call would
need to be different as the system
will not decode two of the same , at the
same time , one will be discarded
only the qso version can send
'anything' , with 15 chr plain text in 120 seconds
, but its limited to -20 dB s/n
So far so good , good turn out
73-G,
Sent: Sunday, December 08, 2013 11:46 PM
Subject: RE: LF: 73 dial freq-74.5495 TX freq OP-OPDS 65 starts
2200...
G; I set the call sign as WG2XRS4 does it need the slant
bar before the 4? Bob
From: [email protected]To: [email protected]Date:
Sun, 8 Dec 2013 23:34:27 +0000 Subject: Re: LF: 73 dial freq-74.5495 TX freq
OP-OPDS 65 starts 2200...
Substantial signals on the first
pass !
NB: There seems to be something
'odd' with the psk-map , unless you set
'wg2xrs' then the distance is not
being picked up , the spots are in the data
base , and show with selected search
-Jay , - 9 dB ? , what is the RX pass
band ?
| -23 |
OPERA |
0.073 |
08/12/2013
23:07 |
United States |
1386544075 |
WG2XRS |
|
W3NF |
| -20 |
OPERA |
0.073 |
08/12/2013 23:07 |
United States |
1386544075 |
WG2XRS |
|
K3SIW |
| -9 |
OPERA |
0.073 |
08/12/2013 23:07 |
United States |
1386544075 |
WG2XRS |
|
W1VD |
| -18 |
OPERA |
0.073 |
08/12/2013 23:07 |
United States |
1386544078 |
WG2XRS |
|
KB4OER |
Sent: Sunday, December 08, 2013 10:39 PM
Subject: Re: LF: 73 dial freq-74.5495 TX freq OP-OPDS 65 starts
2200...
Good turn out for the first cycle ,
started 2200z
G,
Sent: Sunday, December 08, 2013 5:54 PM
Subject: LF: 73 dial freq-74.5495 TX freq OP-OPDS 65 starts
2200...
WG2XRS/4 NY will try the 65 mode tonight-hope for some decodes-Bob
|
