Hi Markus,
I´ve no problems with
r3058:
2200 -25 0.1 0.137601 -1 G8HUH IO81 23
2200 -9 0.8
0.137607 0 DK7FC JN49 30
2230 -21 -0.6
0.137601 -1 G8HUH IO81 23
2230 -8 0.8
0.137607 0 DK7FC JN49 30
2300 -7 1.1
0.137607 0 DK7FC JN49 30
2330 -5 1.1
0.137607 0 DK7FC JN49 30
0000 -4 1.5
0.137607 0 DK7FC JN49 30
0030 -5 1.5
0.137607 0 DK7FC JN49 30
0100 -11 1.8
0.137607 0 DK7FC JN49 30
0130 -4 0.8
0.137607 0 DK7FC JN49 30
0200 -5 1.8
0.137607 0 DK7FC JN49 30
0230 -4 1.1
0.137607 0 DK7FC JN49 30
0300 -6 1.1
0.137607 0 DK7FC JN49 30
0330 -9 1.5
0.137607 0 DK7FC JN49 30
0400 -8 1.5
0.137607 0 DK7FC JN49 30
0430 -10 1.8
0.137607 0 DK7FC JN49 30
0500 -11 0.8
0.137607 0 DK7FC JN49 30
0530 -10 0.8
0.137607 0 DK7FC JN49 30
0530 -34 0.8
0.137610 -1 DK7FC JN49 30
0600 -10 1.1
0.137607 0 DK7FC JN49 30
0630 -9 1.1
0.137607 0 DK7FC JN49 30
0630 -33 1.5 0.137610 -1
DK7FC JN49 30
0700 -9 1.1 0.137607 0
DK7FC JN49 30
All WSPR15 spots were uploaded but you are right, the
S/N seems too low, I remember that Stefans signal was always in the +dB range.
73 Joe
...same problem here. Until today I
ran r2960 which uploads spots ok. Then upgraded to r3058 in the
same directory (c:\Programme\wspr\). After a successful
WSPR-15 decode, "Uploading Spots" does stay yellow continuously
but nothing seems to come through to WSPRnet. Restarting the
program does has not helped. In the setup, my locator is JN59nj (no
O's involved here ;-), and Rx BFO is non-standard 2000 Hz. Running under WinXP
SP3 on a small Atom netbook.
Like in the previous versions, Stefan's SNR is displayed as
2 dB, while it should physically be more like 20 dB here.
From: Dave G3WCB.
[mailto:ganymede444@...]
Sent: 07 May 2013 21:33
To: rsgb_lf_group@...
Subject: RE: [rsgb_lf_group] WSPR-X
Hi, Mike.
V0.8 r3058 works for me, but the earlier revisions wouldn't upload spots.
I'm using Windows 2000. I haven't seen any chat on either reflector about
r3058 not uploading. I guess that you've done all the usual set-up stuff,
entered your locator, etc.
I recall that one user suggested that you might need to check the "Force 6
digit locator" box on the setup page, but I haven't done that here.
73, Dave G3WCB IO91RM
-----Original Message-----
From: rsgb_lf_group@...
[mailto:rsgb_lf_group@...]On Behalf Of Mike Dennison
Sent: 07 May 2013 18:52
To: rsgb_lf_group@...
Subject: [rsgb_lf_group] WSPR-X
Sorry if I have missed it, but was there a solution to
WSPR-X not uploading spots to the WSPR database? I am
running the latest version (v0.8, r3058) and it tells me it
is uploading spots but they do not appear.
Mike, G3XDV
===========
