Hi Marco,
That is nice, thank you :-)) Funny. It is my first RTTY transmission
EVER! :-)
Do you like to try a QSO? Would your TX system be ready for it?
73, Stefan
Am 05.03.2013 15:38, schrieb Marco:
Hello Stefan,
TEST TEST TEST RTTY BEACON DE DK7FC DK7FC DK7FC
LOCATOR: JN49IK JN49IK JN49IK
QTH: HEIDELBERG HEIDELBERG HEIDELBERG
OP: STEFAN STEFAN STEFAN
TX: HOMEMADE CLASS-D PA RUNNING ABOUT 50W FROM A 12V SUPPLY
ANT: INV-L 30M UP AND 70M LONG
REPORTS WELCOME VIA RSGB LF GROUP AT BLACKSHEEP.ORG
73 73 73
vy73
Marco, DD7PC
Eddie, LF,
I just learned how to program a beacon transmission and now i'm running
a test transmission in RTTY 50 Baud and 85 Hz shift on 478.2 kHz (ish).
Will do some tests via Twente WEB SDR now. It's still daytime so the
signal may still be down.
Picture from local grabber RX attached (antenna disconnected).
Try to catch it :-)
I would like to do some QSOs later, if someone is strong enough and
willing.
73, Stefan/DK7FC
Am 05.03.2013 12:24, schrieb Stefan Schäfer:
Hi Eddie, LF,
Am 04.03.2013 20:43, schrieb g3zjo:
We make do with Windows, but
it isn't perfect. In fact, Windows computers can be extremely annoying.
They're full of all sorts of annoying features that just get in our way
and slow us down, distracting us from getting work done or doing
whatever else we want to do. We'll help you disable some of the worst
Windows annoyances.
My sentiments entirely and one day it has to go to be replaced by
something modern.
Just mentioned in passing no debates please.
:-)
OK :-)
Now, are you prepared to listen for me? This evening i would like to
make a QSO, if this is possible. However the data rate is quite high so
i assume you need a relative high power to keep the error rate low.
Yes I will listen for you no problem, let me know on here when you want
to try. Yes the data bits do not stay long in the same place so it is
for you QRO guys or short distance and medium distance with lifts for
the QRP'rs.
I slept in very early last evening, sorry, so i missed to do a test on
air last night. But today!
Which baud rate and frequency shift is recommended and which frequency?
Follow Gary and be compatible seems sensible, Baud rate used is 50
shift 85 Hz QRG 478.200KHz set you baud rate and shift in Menu - MODE -
RTTY - Opions at the bottom of the list.
RRRR.
I will do so :-)
73, cul, Stefan
PS: Is there a possibility to run a beacon message in that program? It
is quite intuitive but i didn't find that function.
I look forward to seeing you sigs.
73 Eddie
73, Stefan/DK7FC
|
|
