Return to KLUBNL.PL main page

rsgb_lf_group
[Top] [All Lists]

Re: LF: RTTY tonight.

To: <[email protected]>
Subject: Re: LF: RTTY tonight.
From: "Graham" <[email protected]>
Date: Sun, 3 Mar 2013 22:48:38 -0000
Importance: Normal
In-reply-to: <[email protected]>
References: <58DDEF66BD1F4FCDA781E159BB3130D4@GaryAsus> <[email protected]> <[email protected]> <[email protected]>
Reply-to: [email protected]
Sender: [email protected]
There  you  are  !!!!   not  quite  N ^n    but  just a  few of the  more  popular  ones  : )
 
G : ))
 
A list of the  ris  auto-mod's   detection   in the  latest  adif  spec
 
 
IF NUMBER=1 THEN MODE:='BPSK31' ELSE
IF NUMBER=2 THEN MODE:='BPSK63' ELSE
IF NUMBER=3 THEN MODE:='QPSK63' ELSE
IF NUMBER=4 THEN MODE:='BPSK125' ELSE
IF NUMBER=5 THEN MODE:='QPSK125' ELSE
IF NUMBER=7 THEN MODE:='PSKFEC31' ELSE
IF NUMBER=8 THEN MODE:='PSK10' ELSE

{"MT63" parameter 1 parameter 2 (parameter 1: "500", "1000" (1000 Hz) or
"2000" (2000 Hz),
parameter 2: "LG" (Long), "ST" (Short) or "VST" (Very short)
Example: MT63-1000-LG}
IF NUMBER=9 THEN MODE:='MT63-500-LG' ELSE
IF NUMBER=10 THEN MODE:='MT63-500-ST' ELSE
IF NUMBER=11 THEN MODE:='MT63-500-VST' ELSE
IF NUMBER=12 THEN MODE:='MT63-1000-LG' ELSE
IF NUMBER=13 THEN MODE:='MT63-1000-ST' ELSE
IF NUMBER=14 THEN MODE:='MT63-1000-VST' ELSE
IF NUMBER=15 THEN MODE:='MT63-2000-LG' ELSE
IF NUMBER=17 THEN MODE:='MT63-2000-ST' ELSE
IF NUMBER=18 THEN MODE:='MT63-2000-VST' ELSE

IF NUMBER=19 THEN MODE:='PSKAM10' ELSE
IF NUMBER=20 THEN MODE:='PSKAM31' ELSE
IF NUMBER=21 THEN MODE:='PSKAM50' ELSE
IF NUMBER=22 THEN MODE:='PSK63F' ELSE
IF NUMBER=23 THEN MODE:='PSK220F' ELSE

{"CHIP 64" parameter 1 (parameter 1: "64" or "128"), Example: CHIP-64}
IF NUMBER=24 THEN MODE:='CHIP-64' ELSE
IF NUMBER=25 THEN MODE:='CHIP-128' ELSE

IF NUMBER=26 THEN MODE:='CW' ELSE

{"CCW" parameter 1 parameter 2 (parameter 1: "OOK" or "FSK",
parameter 2: "12" (12 wpm), "24" (24 wpm) or "48" (48 wpm)
Examples: CCW-OOK-12 or CCW-FSK-24}
IF NUMBER=27 THEN MODE:='CCW-OOK-12' ELSE
IF NUMBER=28 THEN MODE:='CCW-OOK-24' ELSE
IF NUMBER=29 THEN MODE:='CCW-OOK-48' ELSE
IF NUMBER=30 THEN MODE:='CCW-FSK-12' ELSE
IF NUMBER=31 THEN MODE:='CCW-FSK-24' ELSE
IF NUMBER=33 THEN MODE:='CCW-FSK-48' ELSE

{Pactor1 ARQ not RX/TX in Multipsk 4.1.1}
IF NUMBER=34 THEN MODE:='PACTOR1-FEC' ELSE

{"PACKET" parameter 1 (parameter 1: "300" (bauds) or "1200"
(bauds)),Example: PACKET-300}
IF NUMBER=35 THEN MODE:='PACKET-300' ELSE
IF NUMBER=36 THEN MODE:='PACKET-1200' ELSE

{"ASCII" parameter 1 (parameter 1: "7" (7 bits) or "8" (8 bits)), Example:
ASCII-7}
IF NUMBER=37 THEN MODE:='ASCII-7' ELSE
IF NUMBER=38 THEN MODE:='ASCII-8' ELSE

{"RTTY" parameter 1 (parameter 1: "45" (45 bauds), "50" (50 bauds), "75"
(75 bauds)), Example: RTTY-45}
IF NUMBER=39 THEN MODE:='RTTY-45' ELSE
IF NUMBER=40 THEN MODE:='RTTY-50' ELSE
IF NUMBER=41 THEN MODE:='RTTY-75' ELSE

IF NUMBER=42 THEN MODE:='AMTOR FEC' ELSE

{"THROB" parameter 1 (parameter 1: "1" (1 baud), "2" (2 bauds) or "4" (4
bauds)), Example: THROB-2}
IF NUMBER=43 THEN MODE:='THROB-1' ELSE
IF NUMBER=44 THEN MODE:='THROB-2' ELSE
IF NUMBER=45 THEN MODE:='THROB-4' ELSE

{"THROBX" parameter 1 (parameter 1: "1" (1 baud) or "2" (2 bauds)),
Example: THROBX-2}
IF NUMBER=46 THEN MODE:='THROBX-1' ELSE
IF NUMBER=47 THEN MODE:='THROBX-2' ELSE

{"CONTESTIA" parameter 1 parameter 2 (parameter 1: "4" (4 tones), "8" (8
tones), "16" (16 tones), "32" (32 tones), parameter 2: "250" (B=250 Hz),
"500" (B=500 Hz) or "1000" (B=1000 Hz))...same parameters as OLIVIA
Examples: CONTESTIA-32-1000 or CONTESTIA-8-500
Note: the following are the main Contestia modes:
CONTESTIA-4-250, CONTESTIA-4-500, CONTESTIA-8-250, CONTESTIA-8-500,
CONTESTIA-16-500, CONTESTIA-16-1000, CONTESTIA-32-1000}
IF NUMBER=49 THEN MODE:='CONTESTIA-8-250' ELSE
IF NUMBER=50 THEN MODE:='CONTESTIA-16-500' ELSE
IF NUMBER=51 THEN MODE:='CONTESTIA-32-1000' ELSE
IF NUMBER=52 THEN MODE:='CONTESTIA-8-500' ELSE
IF NUMBER=53 THEN MODE:='CONTESTIA-16-1000' ELSE
IF NUMBER=54 THEN MODE:='CONTESTIA-4-500' ELSE
IF NUMBER=55 THEN MODE:='CONTESTIA-4-250' ELSE

IF NUMBER=56 THEN MODE:='VOICE' ELSE
IF NUMBER=57 THEN MODE:='MFSK16' ELSE
IF NUMBER=60 THEN MODE:='MFSK8' ELSE

{"RTTYM" parameter 1 parameter 2 (parameter 1: "4" (4 tones), "8" (8
tones), "16" (16 tones), "32" (32 tones), parameter 2: "250" (B=250 Hz),
"500" (B=500 Hz) or "1000" (B=1000 Hz))...same parameters as OLIVIA
Examples: RTTYM-32-1000 or RTTYM-8-500
Note: the following are the main RTTYM modes: RTTYM-4-250, RTTYM-4-500,
RTTYM-8-250, RTTYM-8-500, RTTYM-16-500, RTTYM-16-1000, RTTYM-32-1000}
IF NUMBER=61 THEN MODE:='RTTYM-8-250' ELSE
IF NUMBER=62 THEN MODE:='RTTYM-16-500' ELSE
IF NUMBER=63 THEN MODE:='RTTYM-32-1000' ELSE
IF NUMBER=65 THEN MODE:='RTTYM-8-500' ELSE
IF NUMBER=66 THEN MODE:='RTTYM-16-1000' ELSE
IF NUMBER=67 THEN MODE:='RTTYM-4-500' ELSE
IF NUMBER=68 THEN MODE:='RTTYM-4-250' ELSE

{"OLIVIA" parameter 1 parameter 2 (parameter 1: "4" (4 tones), "8" (8
tones), "16" (16 tones), "32" (32 tones), parameter 2: "250" (B=250 Hz),
"500" (B=500 Hz) or "1000" (B=1000 Hz))
Examples: OLIVIA-32-1000 or OLIVIA-8-500
Note: the following are the main Olivia modes: OLIVIA-4-250, OLIVIA-4-500,
OLIVIA-8-250, OLIVIA-8-500, OLIVIA-16-500, OLIVIA-16-1000, OLIVIA-32-1000}
IF NUMBER=69 THEN MODE:='OLIVIA-8-250' ELSE
IF NUMBER=70 THEN MODE:='OLIVIA-16-500' ELSE
IF NUMBER=71 THEN MODE:='OLIVIA-32-1000' ELSE
IF NUMBER=72 THEN MODE:='OLIVIA-8-500' ELSE
IF NUMBER=73 THEN MODE:='OLIVIA-16-1000' ELSE
IF NUMBER=74 THEN MODE:='OLIVIA-4-500' ELSE
IF NUMBER=75 THEN MODE:='OLIVIA-4-250' ELSE

IF NUMBER=76 THEN MODE:='PAX' ELSE
IF NUMBER=77 THEN MODE:='PAX2' ELSE
IF NUMBER=78 THEN MODE:='DOMINOF' ELSE
IF NUMBER=79 THEN MODE:='FAX' ELSE
{the sub-modes SSTV are automatically recognized in SSTV so no parameters
are needed for SSTV}
IF NUMBER=81 THEN MODE:='SSTV' ELSE

{"DOMINOEX" parameter 1 and optionally parameter 2 (parameter 1: "4" (4
baud) , "5" (5 bauds),
"8" (8 bauds), "11" (11 bauds), "16" (16 bauds), "22" (22 bauds),
parameter 2 "" (no parameter 2 for non-FEC) or "FEC" (for FEC correction))
Example: DOMINOEX-11 or DOMINOEX-16-FEC (parameter 2 is optional)}
IF NUMBER=84 THEN MODE:='DOMINOEX-4' ELSE
IF NUMBER=85 THEN MODE:='DOMINOEX-5' ELSE
IF NUMBER=86 THEN MODE:='DOMINOEX-8' ELSE
IF NUMBER=87 THEN MODE:='DOMINOEX-11' ELSE
IF NUMBER=88 THEN MODE:='DOMINOEX-16' ELSE
IF NUMBER=90 THEN MODE:='DOMINOEX-22' ELSE
IF NUMBER=92 THEN MODE:='DOMINOEX-4-FEC' ELSE
IF NUMBER=93 THEN MODE:='DOMINOEX-5-FEC' ELSE
IF NUMBER=97 THEN MODE:='DOMINOEX-8-FEC' ELSE
IF NUMBER=98 THEN MODE:='DOMINOEX-11-FEC' ELSE
IF NUMBER=99 THEN MODE:='DOMINOEX-16-FEC' ELSE
IF NUMBER=101 THEN MODE:='DOMINOEX-22-FEC' ELSE

IF NUMBER=104 THEN MODE:='FELD HELL' ELSE
IF NUMBER=105 THEN MODE:='PSK HELL' ELSE
IF NUMBER=106 THEN MODE:='HELL 80' ELSE

{"FMHELL" parameter 1 (parameter 1: "105" (105 bauds) or "245" (245
bauds)),
Example: FMHELL-245}
IF NUMBER=107 THEN MODE:='FM HELL-105' ELSE
IF NUMBER=108 THEN MODE:='FM HELL-245' ELSE

IF NUMBER=110 THEN MODE:='QPSK31' ELSE

{"PACKET" parameter 1 (parameter 1: "110" (bauds),Example: PACKET-110}
IF NUMBER=113 THEN MODE:='PACKET-110' ELSE

IF NUMBER=114 THEN MODE:='141A' ELSE

IF NUMBER=116 THEN MODE:='OLIVIA-8-1000' ELSE
IF NUMBER=117 THEN MODE:='CONTESTIA-8-1000' ELSE
IF NUMBER=119 THEN MODE:='RTTYM-8-1000' ELSE

IF NUMBER=123 THEN MODE:='DTMF' ELSE

IF NUMBER=125 THEN MODE:='ALE400' ELSE

IF NUMBER=126 THEN MODE:='BPSK250' ELSE
IF NUMBER=127 THEN MODE:='QPSK250' ELSE

IF NUMBER=131 THEN MODE:='FDMDV' ELSE

IF NUMBER=132 THEN MODE:='JT65-A' ELSE
IF NUMBER=134 THEN MODE:='JT65-B' ELSE
IF NUMBER=135 THEN MODE:='JT65-C' ELSE

IF NUMBER=136 THEN MODE:='THOR-4' ELSE
IF NUMBER=137 THEN MODE:='THOR-8' ELSE
IF NUMBER=138 THEN MODE:='THOR-16' ELSE
IF NUMBER=139 THEN MODE:='THOR-5' ELSE
IF NUMBER=143 THEN MODE:='THOR-11' ELSE
IF NUMBER=145 THEN MODE:='THOR-22' ELSE

IF NUMBER=146 THEN MODE:='THROBX-4' ELSE

IF NUMBER=147 THEN MODE:='MFSK32' ELSE
IF NUMBER=148 THEN MODE:='MFSK11' ELSE
IF NUMBER=152 THEN MODE:='MFSK22' ELSE

IF NUMBER=153 THEN MODE:='CALL ID' ELSE

{"PACKET" parameter 1 (parameter 1: "PSKbauds")}
IF NUMBER=155 THEN MODE:='PACKET-PSK1200' ELSE
IF NUMBER=156 THEN MODE:='PACKET-PSK250' ELSE
IF NUMBER=159 THEN MODE:='PACKET-PSK63' ELSE

IF NUMBER=163 THEN MODE:='OLIVIA-8-125' ELSE
IF NUMBER=169 THEN MODE:='CONTESTIA-8-125' ELSE
IF NUMBER=170 THEN MODE:='RTTYM-8-125' ELSE

{MIL-STD-188-110A in asynchronous format 8N1 (8 data bits, no parity, 1
stop bit)}
IF NUMBER=172 THEN MODE:='110A-8N1' ELSE

IF NUMBER=173 THEN MODE:='BPSK500' ELSE

{ "PSK Robust" or "PSKR" in short}
IF NUMBER=183 THEN MODE:='PSK125R' ELSE
IF NUMBER=186 THEN MODE:='PSK250R' ELSE
IF NUMBER=187 THEN MODE:='PSK500R' ELSE

{"PACKET" PSK at 31 bauds (parameter 1: "PSKbauds")}
IF NUMBER=189 THEN MODE:='PACKET-PSK31' ELSE

{Contestia modes for UHF and emergency communications }
IF NUMBER=191 THEN MODE:='CONTESTIA-64-2000' ELSE
IF NUMBER=193 THEN MODE:='CONTESTIA-64-1000' ELSE
IF NUMBER=194 THEN MODE:='CONTESTIA-64-500' ELSE
IF NUMBER=201 THEN MODE:='CONTESTIA-32-2000' ELSE

{additive Olivia and Contestia modes}
IF NUMBER=203 THEN MODE:='OLIVIA-4-125' ELSE
IF NUMBER=204 THEN MODE:='CONTESTIA-4-125' ELSE
IF NUMBER=211 THEN MODE:='OLIVIA-64-2000' ELSE
IF NUMBER=214 THEN MODE:='OLIVIA-8-2000' ELSE
IF NUMBER=221 THEN MODE:='OLIVIA-32-2000' ELSE
IF NUMBER=229 THEN MODE:='OLIVIA-4-1000' ELSE
IF NUMBER=234 THEN MODE:='OLIVIA-16-2000' ELSE
IF NUMBER=238 THEN MODE:='OLIVIA-4-2000' ELSE
IF NUMBER=247 THEN MODE:='CONTESTIA-8-2000' ELSE
IF NUMBER=254 THEN MODE:='CONTESTIA-4-2000' ELSE
IF NUMBER=255 THEN MODE:='CONTESTIA-4-1000' ELSE
IF NUMBER=259 THEN MODE:='CONTESTIA-16-2000' ELSE
IF NUMBER=261 THEN MODE:='CONTESTIA-128-2000' ELSE

{mode Lentus}
IF NUMBER=262 THEN MODE:='LENTUS' ELSE

Sent: Sunday, March 03, 2013 10:08 PM
Subject: Re: LF: RTTY tonight.

Thanks Eddie.

I would like to have a simple program for RTTY, not one which allows 10000000000000000000000000000000000000000000000000000000000000000000000000000 possible modes to do. Like ARGO for LF!
Is that one such an easy one? Can you show me a link in the web?

73, Stefan

Am 03.03.2013 22:54, schrieb g3zjo:
Hi Stefan

I use Fldiigi it is an excellent program for RTTY, 50/85 is set able in the Menu - Mode - RTTY - Custom.

Gary uses TrueTTY.

73 Eddie

On 03/03/2013 21:04, Stefan Schäfer wrote:
Hi Gary,

Which program do you use to generate RTTY? As far as i can see it isn't included in SpecLab... Somehow i would like to give it a try.

73, Stefan/DK7FC

<Prev in Thread] Current Thread [Next in Thread>