Return to KLUBNL.PL main page

[Top] [All Lists]

Re: LF: Beacon to the west

To: [email protected]
Subject: Re: LF: Beacon to the west
From: Stefan Schäfer <[email protected]>
Date: Thu, 20 Dec 2012 02:05:47 +0100
In-reply-to: <[email protected]>
References: <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]>
Reply-to: [email protected]
Sender: [email protected]
User-agent: Mozilla/5.0 (Windows; U; Windows NT 6.1; de; rv: Gecko/20100227 Thunderbird/3.0.3
These lines must fit exactly in the 2 minute slot showing in the
spectrogram. They appear at "460" which means 136.000 +1460 Hz. They are
no sharp lines, rather broad.
Do they? Can you send me a screenshot?

73, Stefan

Am 20.12.2012 01:59, schrieb [email protected]:
Nothing on the OP32 screen as yet, Graham.  Am seeing some short green
lines on  the WSPR screen (could be DK7FC?) but no decodes.

On Thu, 20 Dec 2012, Graham wrote:


Depends on the PC , but you can run X 2 Opera , set one to Op32 and the other OP8 and you can monitor the two speeds , switch the w/fall off if cpu load is too high
No decodes  yet then ?

73 -G..

From: <[email protected]>
Sent: Thursday, December 20, 2012 12:13 AM
To: <[email protected]>
Subject: Re: LF: Beacon to the west

Hi G.. and Stefan,

Thanks to a helpful tip  from Joe W1JT, WSPR is now running along
with OP32 (136 kHz USB).  Unfortunately there is much noise (perhaps
a SMPS in a neighbours house) and nothing has been decoded so far tonight.

On Thu, 20 Dec 2012, Stefan Schäfer wrote:

I would give it a try io OP8.

Joe/VO1NA, are you reading this? Do we want to give it a try?

73, Stefan

Am 20.12.2012 00:31, schrieb Graham:

Thought you would of tried for vo1na , op32 ? condx dont look too good , no decodes last night , but Joe is monitoring again now .
Back to vintage data on 502 at the moment , has to be
audible from the speaker or no print !

From: "Stefan Schäfer" <[email protected]>
Sent: Wednesday, December 19, 2012 11:04 PM
To: <[email protected]>
Subject: LF: Beacon to the west


In the moment i'm running a QRSS-60 beacon on 136.172 kHz. A few turns. If someone is interested...
During that time i will add a variometer part to the MF loading
coil. The antenna Q requires an adjustable inductance for
optimised operation, which is a bit annoying. Never mind...
This is to prepare QRSS-10 beacon transmissions in the uppar part
of the band.
Wonderful hobby.
BTW tnx for the RTTY thread, which is interesting. There is a good entertainment on this refelctor at all (these days, again). Never tried RTTY in my live. But maybe soon :-)
73, Stefan/DK7FC

This electronic communication is governed by the terms and conditions at
This electronic communication is governed by the terms and conditions at

<Prev in Thread] Current Thread [Next in Thread>