LF: Horray!!

[jcraig@mun.ca]

Congrats Stefan.  Looks like you made it!

Hope I don't have something messed up with Opera as there are still no
decodes there yet.

Joe

On Thu, 20 Dec 2012, Stefan Schäfer wrote:

> These lines must fit exactly in the 2 minute slot showing in the spectrogram. 
> They appear at "460" which means 136.000 +1460 Hz. They are no sharp lines, 
> rather broad.
> Do they? Can you send me a screenshot?
>
> 73, Stefan
>
> Am 20.12.2012 01:59, schrieb jcraig@mun.ca:
> > Nothing on the OP32 screen as yet, Graham.  Am seeing some short green
> > lines on  the WSPR screen (could be DK7FC?) but no decodes.
> >
> > On Thu, 20 Dec 2012, Graham wrote:
> >
> > > Joe,
> > >
> > > Depends on the  PC , but you  can  run  X 2  Opera  , set one to  Op32 
> > > and the  other  OP8   and you  can  monitor  the   two  speeds  , switch 
> > > the w/fall  off  if  cpu load is  too  high
> > > No decodes  yet then ?
> > >
> > > 73 -G..
> > >
> > > --------------------------------------------------
> > > From: <jcraig@mun.ca>
> > > Sent: Thursday, December 20, 2012 12:13 AM
> > > To: <rsgb_lf_group@blacksheep.org>
> > > Subject: Re: LF: Beacon to the west
> > >
> > > > Hi G.. and Stefan,
> > > >
> > > > Thanks to a helpful tip  from Joe W1JT, WSPR is now running along
> > > > with OP32 (136 kHz USB).  Unfortunately there is much noise (perhaps
> > > > a SMPS in a neighbours house) and nothing has been decoded so far 
> > > > tonight.
> > > > 73
> > > > Joe VO1NA
> > > >
> > > > On Thu, 20 Dec 2012, Stefan Schäfer wrote:
> > > >
> > > > > I would give it a try io OP8.
> > > > >
> > > > > Joe/VO1NA, are you reading this? Do we want to give it a try?
> > > > >
> > > > > 73, Stefan
> > > > >
> > > > >
> > > > > Am 20.12.2012 00:31, schrieb Graham:
> > > > > > Stef,
> > > > > >
> > > > > > Thought  you  would  of  tried   for  vo1na  , op32  ? condx  dont look 
> > > > > > too good , no  decodes  last  night , but  Joe  is  monitoring  again 
> > > > > > now .
> > > > > > Back to  vintage  data on 502   at the  moment , has to  be  audible 
> > > > > > from the  speaker or no  print !
> > > > > > G..
> > > > > >
> > > > > > --------------------------------------------------
> > > > > > From: "Stefan Schäfer" <Stefan.Schaefer@iup.uni-heidelberg.de>
> > > > > > Sent: Wednesday, December 19, 2012 11:04 PM
> > > > > > To: <rsgb_lf_group@blacksheep.org>
> > > > > > Subject: LF: Beacon to the west
> > > > > >
> > > > > > > LF/MF!
> > > > > > >
> > > > > > > In the moment i'm running a QRSS-60 beacon on 136.172 kHz. A few 
> > > > > > > turns. If someone is interested...
> > > > > > > During that time i will add a variometer part to the MF loading coil. 
> > > > > > > The antenna Q requires an adjustable inductance for optimised 
> > > > > > > operation, which is a bit annoying. Never mind...
> > > > > > > This is to prepare QRSS-10 beacon transmissions in the uppar part of 
> > > > > > > the band.
> > > > > > > Wonderful hobby.
> > > > > > > BTW tnx for the RTTY thread, which is interesting. There is a good 
> > > > > > > entertainment on this refelctor at all (these days, again). Never 
> > > > > > > tried RTTY in my live. But maybe soon :-)
> > > > > > > 73, Stefan/DK7FC
> > > > This electronic communication is governed by the terms and conditions at
> > > > http://www.mun.ca/cc/policies/electronic_communications_disclaimer_2012.php 
> > This electronic communication is governed by the terms and conditions at
> > http://www.mun.ca/cc/policies/electronic_communications_disclaimer_2012.php 
This electronic communication is governed by the terms and conditions at
http://www.mun.ca/cc/policies/electronic_communications_disclaimer_2012.php

wspr_na.jpg
Description: JPEG image