Hi Marcus

I can never resist the opportunity to play with new software decoders!!

I have tried to set up the software according to the readme file but no success so far.

A folder has been setup with all the files from your zip + sndutl_e.zip

I am using an SDR14,  VAC 4.12,  Win7/32, WSPR2.11

The VAC is set as default Soundcard for recording and output. The SDR14 (dial or reference frequency = 136 kHz)  is set to use VAC for output. WSPR is set for VAC as input.

I have set WSPR with BFO=670 Hz.

After running wspr-08_rx.bat

The Sound Input panel shows  fr/Hz = 670 (autoset); ft/Hz = 0 ; bu = 100% vo = 0%

The Sound Output panel shows fc/Hz = 2000;  ft/Hz = 0; bu = 0%

The DOS CMD panel shows some sort of loop action: copy audio.dat audio2.dat 1 file copied; goto loop; waitraster 600 -20; del audio.dat; waitraster -120 -5 etc etc

However WSPR is not seeing any signal input.

Where is my mistake in setting up??

73 Terry