Re: LF: Re: Experimental software for WSPR-8 and -32

[IK1WVQ Mauro <ik1wvq@stmb.it>]

Hi to all,

only a question to the experts:

is the SLOW WSPR better than the simple OPERA-32 ???

73 de Mauro K1WVQ




At 16.57 22/09/12, you wrote:
> Hi Markus, LF, 
>
> It works! First reception of DF6NM in WSPR-8 here.
>
> Timestamp Call MHz SNR Drift Grid Pwr Reporter RGrid km az 
>  2012-09-22 14:40   DF6NM   0.137538  
> 0   0   JN59nj   0.5  
> DK7FC/8   JN49ik   175   272  
>  2012-09-22 14:30   DK7FC   0.137499  
> +13   0   JN49ik   1  
> DK7FC/8   JN49ik   0   0 
>
> I have used a virtual audio cable, with success.
>
>
> For those who still try without success, here is my description in simple
> words.
>
> If your RX is a HF TRX at 136 kHz dial setting, then the tone of DF6NM
> appears at 1440 Hz, the tone of DK7FC appears at 1430 Hz.
>
> The microphone input is used and it must be defined as the standard audio
> input device. This is important since the SounInput program related
> always to the default input.
>
> Then soundinput generates the audio file and replays it in
> SoundOutput.
>
> SoundOutput replays it to the standard audio output device, which is the
> virtual audio cable 1 for me. So VAC1 must be defined as the standard
> output device!
>
> The sound input of the WSPR software must be set to VAC1 too.
>
> The file wspr-8_rx.bat must be edited. If the BFO frequency in the WSPR
> software is 1500 Hz, then this value must be inserted for fc in the row
> for the soundoutput settings.
>
> Set the value for fc for soundinput (the row below) to 1450 Hz and save
> the file.
>
> Then double click wspr-8_rx.bat and wait some minutes. You may watch the
> small souninput and soundoutput windows...
>
> Hope it works for others as well now.
>
> 73, Stefan7DK7FC
>
>
> Nessun virus nel messaggio in arrivo.
> Controllato da AVG -
> www.avg.com 
> Versione: 9.0.930 / Database dei virus: 2441.1.1/5285 -  Data di
> rilascio: 09/22/12 08:34:00