Return to KLUBNL.PL main page

rsgb_lf_group
[Top] [All Lists]

Re: LF: Opera 137.6

To: <[email protected]>
Subject: Re: LF: Opera 137.6
From: "Graham" <[email protected]>
Date: Thu, 2 Aug 2012 22:28:46 +0100
Importance: Normal
In-reply-to: <003101cd7085$a4d7a690$0501a8c0@xphd97xgq27nyf>
References: <002401cd701c$b93cfef0$0501a8c0@xphd97xgq27nyf> <5B3AEBCE6DFE487090EB6ED2DF0D7D4E@AGB> <003101cd7085$a4d7a690$0501a8c0@xphd97xgq27nyf>
Reply-to: [email protected]
Sender: [email protected]
Ok Mal
 
Other  thing  would  be to  tune to   the   14  meg   qrg  and see if stations  decode  as  expected , most of  those  will  show  in the  w/f  and  decode  in 120 seconds , that  would  eliminate the  |PC
 
73 -G.

Sent: Thursday, August 02, 2012 9:05 AM
Subject: Re: LF: Opera 137.6

Hi Graham
The signal on waterfall was vy weak on/off like Opera but did not decode and was within the Tram lines. (I remember the Trams in Liverpool in the late 1950's. I used to travel frequently betweem Belfast and Liverpool and beyond in those days !!)
The signal was vy  weak, too much for Opera to decode but possible ok for QRSS ID
Will have another bash on 136 sometime but like to be around when TXing and don't want to sit up all night even the DX is attractive
73 de Mal/g3kev
 
----- Original Message -----
From: Graham
Sent: Wednesday, August 01, 2012 10:12 PM
Subject: Re: LF: Opera 137.6

Something  has to  be  slightly   wrong  there  Mal
 
What is the  CPU meter  showing  during the  decode  period , if its  flicking  into the  RED or  80%/90%  , that  would  indicate  , a possible  problem  , Opera  and  ROS data  modes  have  a  'high'   cpu  load , due to the  volume  of  data  processing 
 
Other  is to  ensure the  audio  falls  'inside'  the  red lines  on the  w/fall 
 
No problem  TX as  this  is  a  simple  low   cpu  load  process 
 
73 - G

Sent: Wednesday, August 01, 2012 8:34 PM
To: rsgb
Subject: LF: Opera 137.6

LF
Old story----- someone active on 137.6 opera but no decode, had it been QRSS I could probably get an ID
de mal/g3kev
 
<Prev in Thread] Current Thread [Next in Thread>