Return to KLUBNL.PL main page

rsgb_lf_group
[Top] [All Lists]

Re: LF: Argo V1 build 137

To: Alberto di Bene <[email protected]>
Subject: Re: LF: Argo V1 build 137
From: Michel Brunel <[email protected]>
Date: Tue, 13 Mar 2012 12:10:04 +0100
In-reply-to: <[email protected]>
References: <[email protected]>
Reply-to: [email protected]
Sender: [email protected]
Hello Alberto,

I like very much the new enhancements and the clean look of Argo.
Argo runs successfully with Virtual Audio Cable and Widows7 Ultimate on a 64 
bit platform.

Could you add an optional offset to the frequency ruler to display the actual 
frequency (ie 137700) instead of the audio frequency ?

Another feature I'd like to have is the 'repaint' of the full waterfall when 
either Sensitivity or Contrast is changed. 

Thanks & 73

Michel - f5wk

Le lundi 12 mars 2012 à 22:10:51, Alberto écrivait :

> Good evening         all,

>   I updated my old program Argo, producing V1 build 137.  I         still 
> have some changes in mind,
> but before implementing them, I would like to have some feedback         on 
> how it works now.
> It has been so far thoroughly tested by Vernon VE1VDM, Laurence         KL7UK 
> and Claudio I2NDT,
> who greatly helped me in ironing out some quirks it had.  But         
> feedback from a larger audience
> could be of even greater help.

> Some of the enhancements wrt the old version are :

> - Larger window, more suitable to modern PCs
> - Sampling rate fixed at 48 kHz. The 5512 Hz of the old version         more 
> often than not caused errors.
> - Optional WOLA processing of the FFT, to trade time resolution         for 
> frequency resolution.
> - Selectable UTC or Local Time display.
> - Selectable input sound card
> - Optional auto uploading of each capture taken to an FTP server
> - Additional QRSS modes, i.e. QRSS-600 and QRSS-1200
> - Field on the panel for info about the call sign and locator of         the 
> user
> - Can be configured to auto start when loaded, auto capture when        
> started, and auto upload when started
> - A couple of errors were corrected
> - Other things that I do not recall now....

> The updated User Guide has not been completed yet. I intend to         do it 
> not too far in the future...

> If you want to test it, the download place is
> http://dl.dropbox.com/u/15089947/Argo137.rar

> Reports welcome, thanks





-- 



<Prev in Thread] Current Thread [Next in Thread>