RE: LF: RE: MF - ES5AM calling CQ

[Rik Strobbe <Rik.Strobbe@fys.kuleuven.be>]

Hello Jim,

 

some days after my QRSS QSO I heard him very strong (579) and called him in CW (with 250W output). The reply in QRSS3 was "only QRSS". Don't know if it is a legal thing (would surprise me) or he does not work CW.

But I was heard, and as said before I workied him in QRSS3 with only 25W. So his RX is OK.

 

73, Rik  ON7YD - OR7T

 

---

Van: owner-rsgb_lf_group@blacksheep.org [owner-rsgb_lf_group@blacksheep.org] namens Chris Osborn [g3xiz@yahoo.co.uk]
Verzonden: donderdag 8 december 2011 20:01
Aan: rsgb_lf_group@blacksheep.org
Onderwerp: Re: LF: RE: MF - ES5AM calling CQ

Well done Rik,

I worked him in QRSS-3 but he was a good 579 CW signal.

I suspect that I was not audible with him though.

He is still calling but anyone wishing to work him should net onto his frequency

as he didn't copy me on my original xtal frequency of 502.35 kc

73

Chris G3XIZ

---

From: Rik Strobbe <Rik.Strobbe@fys.kuleuven.be>
To: "rsgb_lf_group@blacksheep.org" <rsgb_lf_group@blacksheep.org>
Sent: Thursday, 8 December 2011, 18:52
Subject: LF: RE: MF - ES5AM calling CQ

Hi Chris,

 

he has a very good signal and sensitive RX.

I worked him in QRSS3 some weeks ago with only 25W output.

 

73, Rik  ON7YD - OR7T

 

---

Van: owner-rsgb_lf_group@blacksheep.org [owner-rsgb_lf_group@blacksheep.org] namens Chris Osborn [g3xiz@yahoo.co.uk]
Verzonden: donderdag 8 december 2011 19:41
Aan: LF Group
Onderwerp: LF: MF - ES5AM calling CQ

MF,

ES5AM is calling CQ on 502.1kHz using QRSS-3

He's quite audible here in IO92UB

73

Chris G3XIZ