Return to KLUBNL.PL main page

rsgb_lf_group
[Top] [All Lists]

Re: LF: Decca Mods

To: [email protected]
Subject: Re: LF: Decca Mods
From: Warren Ziegler <[email protected]>
Date: Fri, 4 Nov 2011 20:18:18 -0400
Dkim-signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=mime-version:in-reply-to:references:date:message-id:subject:from:to :content-type:content-transfer-encoding; bh=RDeReGgZtTxN7mfP2tEQsj+O4AKTW7EYJ8WzvtLWsY4=; b=KFyqReEWCH538mFGYHZ2SMTJN+X/7lXGN+D3CC8Ab6+V58sdki54E+YoX6uAXfBhJI Eb34kTa1TaP+Ex11jDthasfncaWwzaT7LVXR8ce/kdni8nmEXUszIXMdDg/VeaagHO4U llcPZhkqhrHkpV91zFxWGLoKRr46sfJcumH4Y=
In-reply-to: <006f01cc9b27$3ac96a10$0401a8c0@xphd97xgq27nyf>
References: <006f01cc9b27$3ac96a10$0401a8c0@xphd97xgq27nyf>
Reply-to: [email protected]
Sender: [email protected]
Thank you Mal!

73 K2ORS


On Fri, Nov 4, 2011 at 3:23 PM, mal hamilton <[email protected]> wrote:
> LF
> Decca mods info
> Hi Band Model 5501 E
> Measuired L= 66uH on orig freq
> C = 23.7 nH
> therefore to retune to 137 Khz needs a 150 nF capicator in series with
> existing C result 137.0 Khz
> This is the most convenient model to modify for the LF BAND
> If you are fortunate to have one of these models, you could be in business
> after a couple of hours.
> Specified drive is 4.5 volts sq or sine wave although some extra drive is an
> advantage say 7 - 10 Volts
> If you have a spare PA capacitor board for the lower freq units there are
> plenty of 150 nF capacitors for the mod.
> These amplifiers and individual units ( 3 per amp) are easily modified for
> any freq of interest 600, 160, 80 metres and maybe even 40 metres. Each
> individual unit will produce around 400 Watts at around 67 volts into a 71
> ohm load or alternatively use 60 volts into a 50 ohm load.
> More info available if needed
>
> 73 de mal/g3kev
>
>



-- 
73 Warren K2ORS
                WD2XGJ
                WD2XSH/23
                WE2XEB/2
                WE2XGR/1


<Prev in Thread] Current Thread [Next in Thread>