Return to KLUBNL.PL main page

rsgb_lf_group
[Top] [All Lists]

Re: LF: 137 ck... PA tests in JN49IK

To: <[email protected]>
Subject: Re: LF: 137 ck... PA tests in JN49IK
From: "mal hamilton" <[email protected]>
Date: Mon, 8 Aug 2011 20:33:29 +0100
References: <001901cc55f1$52b9f660$0401a8c0@xphd97xgq27nyf> <1718E40B78DB418597282F5FFB1AC598@PcMinto> <[email protected]>
Reply-to: [email protected]
Sender: [email protected]
I can see u Stefan but pse cw at this distance
de mal/g3kev
 
----- Original Message -----
Sent: Monday, August 08, 2011 8:27 PM
Subject: Re: LF: 137 ck... PA tests in JN49IK

Hi Minto, LF.

You can correct the offset within SpecLab. If you receive on 700 Hz, just type 137000 in the offset field on the left side ;-) Of course the drift compensation is another thing...

Tonite i will do first PA tests and antenna current measurements. Just built a usual bridge rectifier out of 4x UF5404 diodes and will use a simple DC amperemeter (readout * 1.11). I will be on 137.730, if you need test signals Minto ;-)

Mal cannot see me it seems. I'm answering and am visible at G4WGT who is even more distant. (???) Maybe i am no DX or ...

Due to strong rain my grabber is a bit darker now but the brightness comes back ;-)

If the tests work well, i'll do some beacon tests at increased power tonite...

73, Stefan/DK7FC





Am 08.08.2011 20:56, schrieb Minto Witteveen:
Hi Mal,
 
See attached screenshot.
 
nb: my frequency readout is a bit off, the 10 MHz xtal I use for the SA612 mixer needs some extra calibration.
 
73;s,
Minto pa3bca
 
--------------------------------------------------------------------------
Ceterum censeo Carthaginem delendam esse
 
Sent: Monday, August 08, 2011 19:33
To: rsgb
Subject: LF: 137 ck
 
Just finished my new PSU 60V/10A psu. While testing earlier find NO UK GRABBERS working and DK7FC has a SPURIOUS wobble signal right on 137.7
I will be QRV for a while from now on 137.7 qrs3 for DX qso's and will work locals on CW
73 De Mal/G3KEV
 
<Prev in Thread] Current Thread [Next in Thread>