Hi Minto
Let me know when you are QRV for a QSO on 137. CW will be satisfactory for
both ends with our power and mine
73 es gl
de mal/g3kev
----- Original Message -----
From: "Minto Witteveen" <[email protected]>
To: <[email protected]>
Sent: Friday, July 22, 2011 10:00 PM
Subject: LF: Re: DL6NN on 137
> Well, I am all for it..
>
> Now that we (PA) are kicked off of 500 KHz (again!) I needed another
> challenge. So 136 KHz it is.
>
> I have already built a PA for 136. My design is for > 1KW, I have only
> tested it at 650 Watt as my current power supply cannot handle more, and
the
> same goes for my dummy load.
>
> But I do have a 50 Volt 1.2 KW supply that should do the trick.
>
> I do not think QRP is an option on 137 KHz - especially with my antenna
(Mal
> wil probably concur :-) )
>
> Next step is building a variometer (3.5 to 4 mH), and the mixer/driver so
I
> can use my ft817 like in the 500 KHz setup.
>
> Don’t expect met to appear on 136 any time real soon however,
unformtunately
> I do not have much time at the moment to complete the project. My target
is
> the end of August.
>
>
>
> For those interested: I have created a quick and dirty webpage with some
> info abt my experiment:
>
>
http://www.pa3bca.nl/index.php?option=com_content&view=article&id=22&Itemid=
16
>
>
>
> Regards,
>
> Minto pa3bca
>
>
>
>
>
> -----Original Message-----
>
> >From: Stefan Schäfer
>
> >Sent: Friday, July 22, 2011 20:07
>
> >To: [email protected]
>
> >Subject: Re: LF: Re: DL6NN on 137
>
> >He seems to be new on the band. No other stations visible in the moment.
>
> >Surely it would be a positive impulse if new stations could get some
>
> >QSOs. This could start a positive spiral of activity. It's up to us...
>
> >DL6NN in JO30VC, OM Lutz. 99km distant to me, 250km to DF6NM.
>
> >73, Stefan/DK7FC, still in QSO
>
>
|