RE: LF: Re: XIZ_KEV_OK

[Lubos OK2BVG <bvgbob@hotmail.com>]

Hello Mal and Chris!

I see QRSS3 signal DL6MDD on 137.682kHz, I can identify this on without doubts. But no signals from G here, sorry.

Lubos

---

From: g3kevmal@talktalk.net
To: rsgb_lf_group@blacksheep.org
Date: Sun, 22 May 2011 10:02:21 +0100
Subject: LF: Re: XIZ_KEV_OK

Lubos

Condx are good today but some qrn. It looks like you cannot hear me although I can also work OH1TN at this time on cw.

Now QRT.

73 De mal/g3kev

 

----- Original Message -----

From: Lubos OK2BVG

To: _RSGB_LF

Sent: Sunday, May 22, 2011 9:55 AM

Subject: LF: XIZ_KEV_OK

Hello Chris and Mal!

I just see a signal belowe 137.700kHz it is QRSS3 or 4 but I am no able to read this one. Can you use QRSS10?

Lubos 

---

Date: Sun, 22 May 2011 09:28:51 +0100
From: g3xiz@yahoo.co.uk
To: rsgb_lf_group@blacksheep.org
Subject: RE: LF: LF - G3XIZ calling CQ

Dear Lubos,

I am sending now on 137.7 kHz using DFCW-4
I'll look out for you.

73 Chris G3XIZ

--- On Sun, 22/5/11, Lubos OK2BVG <bvgbob@hotmail.com> wrote:

From: Lubos OK2BVG <bvgbob@hotmail.com>
Subject: RE: LF: LF - G3XIZ calling CQ
To: "_RSGB_LF" <rsgb_lf_group@blacksheep.org>
Date: Sunday, 22 May, 2011, 9:03

Hello Chris!

I am waitig for your signal on 137.700kHz.

Lubos, OK2BVG

---

Date: Sun, 22 May 2011 08:40:00 +0100
From: g3xiz@yahoo.co.uk
To: rsgb_lf_group@blacksheep.org
Subject: LF: LF - G3XIZ calling CQ

LF,

I shall be listening for CW contacts on 136.5 kHz until 08.15Z then
for DFCW/QRSS contacts on 137.7 kHz

Any replies or reports will be  very welcome.

Rig:     Home brew TRX
Aer:     40m inverted L at 10m
Power: 150 watts RF
RX aer: G3LNP active loop

73 Chris G3XIZ

=