Hi Mal,
I believe I would as well if I had the antenna's you have but they won't fit in my small garden.
Cheers, Gary - G4WGT.
On 8 March 2011 14:42, mal hamilton <[email protected]> wrote:
That is why they see nothing except local signals. I
copied OE5ODL and DK7FC in QRS3.
mal/vg3kev
----- Original Message -----
Sent: Tuesday, March 08, 2011 2:22
PM
Subject: Re: LF: 8.970.025Khz
Hi Mal,
Most others are monitoring using half my bandwidth ie.Width of one
FFT-bin: 423 uHz , mine is 954 uHz.
Cheers, Gary - G4WGT.
On 8 March 2011 14:04, mal hamilton <[email protected]>
wrote:
Gary
Except a signal is extremely stable your bandwidth is
too narrow. Most I have observed so far are not stable.
mal/g3kev
----- Original Message -----
Sent: Tuesday, March 08, 2011 12:07
PM
Subject: Re: LF: 8.970.025Khz
Hi All,
9kHz grabber back on, loop beamed ESE (approx 110 deg) from IO83qo.
M0BMU pre-amp with 7kHz to 10kHz filter.
73, Gary - G4WGT.
On 8 March 2011 09:27, henny van elst <[email protected]> wrote:
Tu Roger,
henny pa3cpm
73's
----- Original Message -----
Sent: Tuesday, March 08, 2011
9:35 AM
Subject: Re: LF:
8.970.025Khz
Henny
Monitoring overnight in 423uHz BW resulted in no copy of your
signal I am afraid.
73s
Roger G3XBM
Via my 2.4GHz handheld (iPod Touch 4g)
Hi LF,
The tx is on,
freq.8.970.025Khz
antenne curent 200mA,
Henny pa3cpm
73's
Geen virus gevonden in dit
bericht. Gecontroleerd door AVG - www.avg.com Versie: 10.0.1204 / Virusdatabase:
1497/3489 - datum van uitgifte:
03/07/11
|