Hi Graham,
ROS 500 Hz / 1 Bit
RX1: <20:18 UTC> <1,0 Hz> <[email protected]> <STOP> <-25 dB>
RX1: <20:22 UTC> <0,0 Hz> <[email protected]> <STOP> <-27 dB>
RX1: <20:31 UTC> <0,0 Hz> <[email protected]> <STOP> <-23 dB>
RX1: <20:35 UTC> <0,0 Hz> <[email protected]> <STOP> <-22 dB>
RX1: <20:39 UTC> <0,0 Hz> <[email protected]> <STOP> <-21 dB>
RX1: <20:43 UTC> <0,0 Hz> <[email protected]> <STOP> <-25 dB>
RX1: <20:47 UTC> <0,0 Hz> <[email protected]> <STOP> <-28 dB>
ROS EME (started at 20:42)
RX1: <20:43 UTC> <0,0 Hz> <[email protected]> <STOP> <-24 dB>
RX1: <20:47 UTC> <0,0 Hz> <[email protected]> <STOP> <-31 dB>
73,
Michel - F5WK
Le dimanche 2 mai 2010 à 20:10:48, vous écriviez :
> Dual mode ROS Beacon running , check for activity >>
> http://www.wireless.org.uk/grab/
>
> ROS EME
>
> ROS 500 Hz / 1 Bit speed
> Dial set 502.000 KHz USB
>
> Dual reception by running two sessions of ROS . , set eme and HF 500
> rx 1 bit speed
> select the minimum AFC range
>
> The HF 500/1 bit should out perform the eme mode
Software download >>> http://rosmodem.wordpress.com/
> Reports welcome via ref or the auto email mode
>
> Note - Due to low af drive level - NO RX -
>
> Tnx - G .
|
