LF: RE: RE: RE: 500KHz Altoids MEPT on

["Dave G3WCB" <ganymede444@btopenworld.com>]

Hi, Eddie.

 

I'll put the proper "tee" antenna on this morning - it should improve reception.

 

73, Dave

-----Original Message-----
From: owner-rsgb_lf_group@blacksheep.org [mailto:owner-rsgb_lf_group@blacksheep.org]On Behalf Of g3zjo
Sent: 24 January 2010 00:11
To: rsgb_lf_group@blacksheep.org
Subject: LF: RE: RE: 500KHz Altoids MEPT on

Hi Dave

 

Thanks for the Grab, yes that looks pretty promising, a little noisy for accurate confirmation but 17.50 is the time when I changed back to the WSPR MEPT and went for dinner.

 

I will give it another run in the morning. I am still calculating the ERP is only around 200mW .

 

73

 

Eddie G3ZJO

 

-----Original Message-----
From: owner-rsgb_lf_group@blacksheep.org [mailto:owner-rsgb_lf_group@blacksheep.org] On Behalf Of Dave G3WCB
Sent: 23 January 2010 20:39
To: rsgb_lf_group@blacksheep.org
Subject: LF: RE: 500KHz Altoids MEPT on

 

Well, Eddie,

 

I think I saw something.... it stopped at about 1750 utc. Only using a miniwhip here at the moment, so receive performance isn't great on 500 kHz.

 

73, Dave G3WCB IO91RM

 

 

-----Original Message-----
From: owner-rsgb_lf_group@blacksheep.org [mailto:owner-rsgb_lf_group@blacksheep.org]On Behalf Of g3zjo
Sent: 23 January 2010 13:56
To: knightsqrss@cnts.be; rsgb_lf_group@blacksheep.org; GQRP@yahoogroups.com
Subject: LF: 500KHz Altoids MEPT on

I have my QRPp Altoids Tin, (actually 3 Altoids size units Driver – PA – Keyer),  500KHz MEPT on now for a few hours.

 

Frequency 503.22KHz

 

Modulation QRSS3 FSK

 

Power 500mW at 50 Ohms

 

Total current consumption 96mA at 12 Volts

 

Antenna 6m Top Load Vertical

 

ERP >= 1mWatt

 

All reports very welcome

 

Eddie G3ZJO

 

No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 9.0.730 / Virus Database: 271.1.1/2639 - Release Date: 01/22/10 19:33:00