LF: Re: DEGEN 1103

To:	<[email protected]>
Subject:	LF: Re: DEGEN 1103
From:	"Julian Hardstone" <[email protected]>
Date:	Wed, 17 Dec 2008 21:13:53 -0000
Authenticated-sender:
References:	<004301c9549b$d0f65b40$0301a8c0@mal769a60aa920> <E76ED69FBF9E44BCB24956AB612C2C64@tc402d33c25094>
Reply-to:	[email protected]
Sender:	[email protected]

To return to this thread, I have realised that tuning the 1103 at LF is muchsimpler than

previously suggested - see http://www.rosestone.me.uk/Degen/VLF.txt

Having dug out my DE-1103, I tried it on 500kHz. Last night around 00z I couldhear GI4DPEbeaconing, in the clear at ~R3-4 in Worcestershire, both on the ferrite orwhip, and also on the

matching Tecsun AN-200 MW loop anteanna, which tunes down to ~510kHz unmodified.

Sensitivity is much lower at 136 on the ferrite, with DCF39 only R4 in daytime.

<Prev in Thread]	Current Thread	[Next in Thread>
LF: RE: DEGEN 1103, (continued) LF: RE: DEGEN 1103, Alberto di Bene Re: LF: RE: DEGEN 1103, Roman RW3ADB LF: RE: RE: DEGEN 1103, Gary - G4WGT Re: LF: RE: DEGEN 1103, mal hamilton Re: LF: DEGEN 1103...Simple RX Loop info, Mike-WE0H Re: LF: DEGEN 1103...Simple RX Loop info, mal hamilton Re: LF: DEGEN 1103...Simple RX Loop info, Mike-WE0H RE: LF: DEGEN 1103...Simple RX Loop info, Chris Trayner LF: Re: DEGEN 1103, Julian Hardstone LF: Re: DEGEN 1103, Markus Vester LF: Re: DEGEN 1103, Julian Hardstone <=

Previous by Date:	Re: LF: LF [184 kHz] VO1NA good signal, "Jean-Pierre Méré (F1AFJ)"
Next by Date:	Re: LF: WPF, Roman RW3ADB
Previous by Thread:	LF: Re: DEGEN 1103, Markus Vester
Next by Thread:	LF: /16 on the air 507.90kc CW mode, Mike-WE0H
Indexes:	[Date] [Thread] [Top] [All Lists]