Warren
Actually, not according to the info on 500kc.com ...
http://www.500kc.com/stations_frequency.htm
That's what I went by. What gives?
Jay
----- Original Message -----
From: "Warren Ziegler" <[email protected]>
To: <[email protected]>
Sent: Friday, November 21, 2008 4:40 PM
Subject: Re: LF: Re: RE: WE2XGR/2 QRSS10 / CW
Jay and the list,
Actually WD2XSH group uses 505.200 - 505.250 for QRSS,
505.250-505.270 was suggested for the XGR group.
In practice it shouldn't make a difference since only 1 of the XSH
group ever uses QRSS and then only rarely.
(The rest of the WD2XSH group is constitutionally opposed to using any
technology developed after WWII ! )
73 Warren K2ORS
On Fri, Nov 21, 2008 at 3:23 PM, <[email protected]> wrote:
Gary
Okay. How about 505.240? I have to be below 505.250 to avoid the XSH gang
that 'owns' 505.25 - 505.27 kHz for their QRSS activity.
Jay
----- Original Message ----- From: "Gary - G4WGT" <[email protected]>
To: <[email protected]>
Sent: Friday, November 21, 2008 2:16 PM
Subject: LF: RE: WE2XGR/2 QRSS10 / CW
Jay,
That frequency will only be about 20Hz above one of the EU beacons, have
a
look at my grabber to see the 3 or 4 beacons there.
http://myweb.tiscali.co.uk/wgtaylor/grabber2.html
If there is a RTTY signal at about 505.800KHz ignore it, just an image.
73
Gary - G4WGT.
-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of
[email protected]
Sent: 21 November 2008 18:58
To: [email protected]; rsgb_lf_group@blacksheep;
[email protected]
Subject: LF: WE2XGR/2 QRSS10 / CW
WE2XGR/2 will be in QRSS10 / CW ID mode tonight on 505.200 kHz from
~2200
to
~0430Z. Please note new frequency for QRSS operation. Regular cw
operation
will remain on 506.5 kHz. If this new frequency conflicts with EU
activity
please advise I'll be happy to change frequency.
Reports are appreciated.
Jay W1VD WD2XNS WE2XGR/2
--
73 Warren K2ORS
WD2XGJ
WD2XSH/23
WE2XEB/2
WE2XGR/1
|
