Return to KLUBNL.PL main page

rsgb_lf_group
[Top] [All Lists]

Re: LF: PSK31 on 500kHz?

To: <[email protected]>
Subject: Re: LF: PSK31 on 500kHz?
From: "Graham" <[email protected]>
Date: Tue, 16 Sep 2008 21:19:27 +0100
Importance: Normal
References: <08B04CB16BCB423BA193046E335149D4@enigma> <3A14A01B61B1491EA2DB51399DEEBD0A@AGB> <22924434B76D40AEBFD1BA48C2425C44@enigma>
Reply-to: [email protected]
Sender: [email protected]
Ok Malcolm,
 
That looks a good set up , I used 20 watts last year for all the data 'experiments' cheating a little with a Racal MA1723  exciter driving a 24v dc class A inter-stage drive amplifier , yes it did need a fan !  and the RA6790GM , not quite home brew, but after prolonged introduction to the MA1723 in fault mode, im not sure where the dividing line is ( potted history  http://groups.google.com/group/uk500khz/web/the-ma1723-liniarity-at-a-price )
 
You may find the 'FLDIGI' software is worth a look, as it has narrow band versions of the mfsk modes that will pass via non linear (amplitude) systems  and the simultaneous multi tone modes , olivia for example. With the long qsb outages on 500 , this software also had an add on, giving a arq function to  'all' the modes, which may enable communications at extended range , out of all the systems, (apart from the  K1JT enhanced processing modes) I found the narrow version of olivia gave the best 'extended' copy at range .  download link > http://www.w1hkj.com/Fldigi.html
 
There are links and the results of various tests etc located on the 'pages'  at  http://groups.google.com/group/uk500khz along with links to the active 500 Khz grabbers
 
 
Good luck,
 
Hopefully 'back soon' as it says on the door !
 
Graham ..  
 
 
 
 
 
 

Sent: Tuesday, September 16, 2008 8:55 AM
Subject: Re: LF: PSK31 on 500kHz?

Hi Graham.
 
I use an Icom 7400 in duplex (TX 3501-3504 kHz, RX 501-504 kHz). The transmit chain is via a home brew 'analogue' downconverter and a rebuilt ENI 320L 20 watt linear, so hope to put out a nice clean PSK. Software, Ham Radio deLuxe/DM780.
 
Please let me know when you are ready to have a go.
Many thanks
Malcolm
G3NZP
----- Original Message -----
From: Graham
Sent: Monday, September 15, 2008 8:16 PM
Subject: Re: LF: PSK31 on 500kHz?

Hi Mal,
 
Well when i finally re instate the  'mf' room , should be back on 'soon  ,  I think there is fsk rtty still about,
 
what system are you running on 500, assume its linear  ?
 
Graham
 
G0NBD.
 
IO83LK
 
 
 

Sent: Monday, September 15, 2008 5:32 PM
Subject: LF: PSK31 on 500kHz?

Hello folks - just rejoined the LF reflector.
 
Is there anybody out there using PSK31 on 500 kHz and if so, what is your usual frequency/time of operating? I should be QRV using this mode within the next couple of days.
 
My QTH is in West Sussex and I've already had day time CW QSOs up 100 km in spite of a very poor antenna system, but plans are in hand to improve efficiency.
 
73 Malcolm
G3NZP



No virus found in this incoming message.
Checked by AVG - http://www.avg.com
Version: 8.0.169 / Virus Database: 270.6.21/1672 - Release Date: 9/15/2008 09:21



No virus found in this incoming message.
Checked by AVG - http://www.avg.com
Version: 8.0.169 / Virus Database: 270.6.21/1672 - Release Date: 9/15/2008 09:21
<Prev in Thread] Current Thread [Next in Thread>