Return to KLUBNL.PL main page

rsgb_lf_group
[Top] [All Lists]

LF: RE: AOR 7030 replaced

To: <[email protected]>
Subject: LF: RE: AOR 7030 replaced
From: "Victor van Kooten" <[email protected]>
Date: Tue, 9 Sep 2008 20:33:58 -0000
Importance: Normal
In-reply-to: <[email protected]>
Reply-to: [email protected]
Sender: [email protected]
It is possible to turn off the agc with the IC7700,reception of VO1NA more then once..This is a dsp based receiver,also very stable with the OCXO.
 
73
Victor
-----Oorspronkelijk bericht-----
Van: [email protected] [mailto:[email protected]]Namens lawrence mayhead
Verzonden: dinsdag 9 september 2008 16:30
Aan: rsgb
Onderwerp: LF: AOR 7030 replaced

This could be a backward step for those of us using Argo/ Spectran etc to look for
weak signals. All DSP receivers including the Icom 756 Pro 111 are not able to turn
off the AGC. Hence when looking in a small bandwith usually much smaller than the
DSP or even conventional filter bandwiths a strong signal within this larger b/w will
de-sensitise the receiver to the extent that the weak signal will be lost. This was the
problem I had in the early days of TA working.
73 Laurie.
<Prev in Thread] Current Thread [Next in Thread>