Return to KLUBNL.PL main page

rsgb_lf_group
[Top] [All Lists]

LF: first X-band 500 / 7033.0 kHz QSO

To: <[email protected]>
Subject: LF: first X-band 500 / 7033.0 kHz QSO
From: Roman RW3ADB <[email protected]>
Date: Mon, 24 Mar 2008 04:35:29 +0300
In-reply-to: <1044CA528DC34045B84CC54BF0DC74B5@Amilo3205>
References: <02ab01c88ccc$f3e94ff0$0301a8c0@g3kev> <00ca01c88cd3$4138d1d0$6401a8c0@wgt01> <02d001c88ce4$5981f3a0$0301a8c0@g3kev> <1044CA528DC34045B84CC54BF0DC74B5@Amilo3205>
Reply-to: [email protected]
Sender: [email protected]

Hi LF'rs!

Many TNX to G3KEV for a QSX 502.632/7033.0 kHz QSO!
First xband QSX/QSO from England to Russia was take a place.

Screen-shots from my side:
http://qrss.nm.ru/23mar2008/QSO_XBAND_G3KEV/502.62_10_0019.jpg
http://qrss.nm.ru/23mar2008/QSO_XBAND_G3KEV/502.62_10_0020.jpg
http://qrss.nm.ru/23mar2008/QSO_XBAND_G3KEV/502.62_10_0021.jpg
http://qrss.nm.ru/23mar2008/QSO_XBAND_G3KEV/502.62_10_0022.jpg
http://qrss.nm.ru/23mar2008/QSO_XBAND_G3KEV/502.62_10_0023.jpg
http://qrss.nm.ru/23mar2008/QSO_XBAND_G3KEV/502.62_10_0033.jpg
http://qrss.nm.ru/23mar2008/QSO_XBAND_G3KEV/502.62_10_0036.jpg
http://qrss.nm.ru/23mar2008/QSO_XBAND_G3KEV/502.62_10_0036.jpg
http://qrss.nm.ru/23mar2008/QSO_XBAND_G3KEV/502.62_10_0043.jpg
http://qrss.nm.ru/23mar2008/QSO_XBAND_G3KEV/502.62_10_0052.jpg
http://qrss.nm.ru/23mar2008/QSO_XBAND_G3KEV/502.62_3_0001.jpg
http://qrss.nm.ru/23mar2008/QSO_XBAND_G3KEV/502.62_3_0003.jpg
http://qrss.nm.ru/23mar2008/QSO_XBAND_G3KEV/502.62_3_0004.jpg
http://qrss.nm.ru/23mar2008/QSO_XBAND_G3KEV/502.62_3_0006.jpg
http://qrss.nm.ru/23mar2008/QSO_XBAND_G3KEV/502.62_3_0007.jpg
http://qrss.nm.ru/23mar2008/QSO_XBAND_G3KEV/502.62_3_0008.jpg
http://qrss.nm.ru/23mar2008/QSO_XBAND_G3KEV/502.62_3_0009.jpg
The time on the shots is a Moscow LT GMT+3.

When we started  I was copy Mal's signal into QRSS-30 only-(
Then level was more and more high!
I changed mode's into Spectran from 30 to 10 and to 3 in the finish!
In the final QRSS-3 signal G3KEV was readable good.
I was change my report to O from T.

Some later I was copy G3KEV in QRSS-3  in QSO DF6NM very good.

RX working condition was very modest and simplest as usual.
My sloper 19.95 m's long 1/4 for 80m band on the roof which I use to TX on 40m band with the tuner.
FT897 as usual.
Old Spectran program.
Sound transit to comp via speaker and microphone as usual.

Many TNX to my friend Andy RN3AGC for the help and temporary 500 kHz grabber from the other side of Moscow.
On the grabber G3KEV was readable good in all time of transmission.
Andy was reported about audible G3KEV signal into his location.
The screen-shots and audio from RN3AGC side soon.

Many TNX to Mal and Andy for the that historical QSO in Russia!

--
Roman RW3ADB.

PS- all wishing to make a QSX 500 kHz/7 Mhz or 500 kHz/3.5 Mhz are welcome!


<Prev in Thread] Current Thread [Next in Thread>