Return to KLUBNL.PL main page

rsgb_lf_group
[Top] [All Lists]

LF: Re: Re: QRSS QRG's > 3579.25 kHz

To: <[email protected]>
Subject: LF: Re: Re: QRSS QRG's > 3579.25 kHz
From: "hamilton mal" <[email protected]>
Date: Sat, 19 Aug 2006 15:40:43 -0000
Delivered-to: [email protected]
References: <[email protected]> <002001c6c387$9d209f80$06be3b3e@fujitsu>
Reply-to: [email protected]
Sender: [email protected]
----- Original Message -----
From: "Dick" <[email protected]>
To: <[email protected]>
Sent: Saturday, August 19, 2006 12:04 PM
Subject: LF: Re: QRSS QRG's > 3579.25 kHz


> Thanks for this info Dave.
> Of course I have these x-tals; they also been used regulary for 80m fox
> hunting TX's.
> Biggest problem however, is to divide by 13........
> I do not have to much schematics about dividers.
>
> I found another solution, hi
> I took an 4.433MHz X-tal and tuned it down to 4406kHz....

I have a couple of 4433.619 khz xtals, was also thinking of pulling these
down in freq. How far down did u get and was it stable enough when divided.
de Mal/G3KEV

> That divided by 16 will give me the 275.4kHz I need to drive the rest of
the
> circuit.
>
> Any schematics/links about how to divide by 13 are welcome.
>
> I'll be on this afternoon 14-15ut on 136.550kHz +/- 50Hz with CW 8wpm
beacon
> mode.
>
> Maybe, one of these days my signal might show up around 137.7 in QRSS
> 3......
>
> Dick, pa4vhf
>
>
>



<Prev in Thread] Current Thread [Next in Thread>