Return to KLUBNL.PL main page

rsgb_lf_group
[Top] [All Lists]

RE: LF: Re: antenna: how to get max. capacity

To: <[email protected]>
Subject: RE: LF: Re: antenna: how to get max. capacity
From: "Gary - G4WGT" <[email protected]>
Date: Sat, 12 Aug 2006 16:48:12 +0100
Delivered-to: [email protected]
Importance: Normal
In-reply-to: <[email protected]>
Reply-to: [email protected]
Sender: [email protected]
Hi Rik & LF,

I remember seeing a multi top wire LF antenna with multi wire vertical
conductors somewhere & I found it in the 'Low Frequency Experimenters
Handbook' in an article written by Peter G3LDO. He shows a 4 wire top with a
4 wire vertical feed & describes it as a 'Traditional T LF Antenna'. What I
am curious about is that if it is detremental to have this multi wire
vertical arrangement as you stated, why has Peter shown it in his article? I
have an Admiralty book 'Handbook of Wireless Telegraphy' (1938) which shows
the same type of T antenna with a multi wire vertical section.  I have also
seen articles elsewhere (maybe on internet) regarding multi wire verticals &
tops were the wires are in a  circular arrangement/format & are presented as
'Cage Antennas & Cage Dipoles' although I believe to increase bandwidth.

The reason I am interested is that I have thought about a similar
arrangement because of my small garden area like Dick.

Comments invited please.

Gary - G4WGT.



-----Original Message-----
From: [email protected]
[mailto:[email protected]]On Behalf Of Rik Strobbe
Sent: 11 August 2006 22:10
To: [email protected]
Subject: Re: LF: Re: antenna: how to get max. capacity


Quoting captbrian <[email protected]>:

> Make the vertical of three parallel conductors , each to the centre of
each
> top wire

Using multiple vertical wires will increase the antenna capacitance
but also decrease the radiation resistance. I guess that a thing you
don't want.

73, Rik  ON7YD - OR7T


Disclaimer: http://www.kuleuven.be/cwis/email_disclaimer.htm



<Prev in Thread] Current Thread [Next in Thread>